Olive Green Outdoor Kitchen Set — Maintenance Free Shell, Fully Recyclable Metal Build
The VANRIOS shed-06-3 is the olive green colorway of the manual flip-up outdoor kitchen set, engineered for buyers who want the lowest possible lifetime upkeep and a metal structure that can be fully recycled at end of life. Olive green powder coating sits on an all-metal aluminum and steel body — no timber, no MDF, no composite filler — while the closed shell keeps the whole station at a slim 840 mm depth for balconies, rooftops and narrow courtyards.
Maintenance Free By Design
- Wipe-down only surface: the powder coated shell, aluminum frame and SS430 panels have no open grain, no exposed timber and no silicone joints, so routine care is a damp cloth wipe — no oiling, sealing, sanding or repainting year after year.
- No corrosion upkeep: aluminumized steel cabinets with a reflective corrosion-resistant surface and SS430 cladding stop the rust creep and paint blistering that force owners of painted steel or timber islands into repaint cycles.
- Self-shedding rain geometry: overlapping shell panels, sealed joints and drainage channels move rain and splash water off the station, so there is no standing water to clean out and no water traps behind the cabinets.
- No power, no service contract: the shell opens by hand crank with gas strut assistance and the burners light by piezo ignition, so there are no motors, no wiring and no batteries to fail or maintain.
- Field-proven hardware: stainless hinges, full stainless fasteners and sealed burner apertures mean no yearly re-tightening or replacing of corroded parts.
Recyclable & Eco-Conscious Materials
- Single-material-family build: shell frame and cabinet structure are aluminum and steel, both of which are 100% recyclable through standard scrap metal streams — no glued timber panels or mixed composite boards to send to landfill.
- Powder coating, not solvent paint: the olive green finish is applied as dry powder and oven cured, which avoids solvent-based paint emissions and keeps the coating separable from the metal at recycling.
- Long service life lowers footprint: a corrosion-resistant metal body with a sealed shell outlasts short-cycle timber or painted steel islands, cutting replacement frequency and the waste that comes with it.
- Mechanical fastening: modular sections are bolted and anchored rather than bonded, so the unit can be dismantled, repaired part by part and the metals sorted cleanly at end of life.
- Repairable modules: sink, grill and fridge bays are independent modules, so a single damaged bay can be swapped instead of scrapping the whole station.
Olive Green Architectural Finish
- Deep olive green powder coating reads as a natural, planted-garden tone that blends into hedges, lawn edges, olive and pine planting schemes and stone paving.
- The same coating is applied to shell, frame and cabinet fronts, so the unit reads as one clean color block from any angle.
- Matte olive hides dust, pollen and water spotting better than light or gloss finishes, which keeps the station looking maintained between washes.
- Other RAL colors can be matched for project orders where a landscape palette has already been fixed.
4 Burner Cooking With Infrared Rear Zone
- 4 stainless steel main burners cover everyday family grilling and steady commercial catering output.
- The rear infrared burner works as a high-intensity sear and warming zone, holding plated dishes at serving temperature during service.
- Piezo ignition lights the burners on the first turn, and the flame-failure device cuts the gas supply if a flame is blown out.
Material Engineering
- Shell frame: aluminum framework with SS430 panel cladding for rust resistance and impact strength.
- Cabinets: aluminumized steel sheet with a reflective, corrosion-resistant surface for humid coastal sites.
- Rain protection: overlapping shell panels, sealed joints and drainage channels shed rain and splash water away from appliances.
Three Cabinet Units
- Sink Units: hand-wash station with faucet cutout and drainage routing space.
- Grill Units: reinforced compartment sized to house the grill and the gas bottle.
- Fridge Units: insulated bay for an outdoor refrigerator or ice box to keep ingredients chilled on site.
Specifications & Configuration
| Brand Name |
VANRIOS |
| Model Number |
shed-06-3 |
| Primary Product Category |
Outdoor Kitchen Set |
| Body Color / Finish |
Olive Green Powder Coating |
| Closed Dimensions |
W2280 x D840 x H1260 mm |
| Shell Frame Material |
Aluminum frame |
| Shell Panel Material |
SS430 panel |
| Cabinet Material |
Aluminumized steel sheet |
| Cabinet Configuration |
Sink cabinet, grill cabinet, fridge cabinet |
| Burner Configuration |
4 main burners + 1 back infrared burner (warming zone) |
| Opening Mechanism |
Manual flip-up shell, hand crank with gas strut assistance |
| Power Requirement |
None — no electricity required |
| Fuel Type |
LPG |
| Ignition & Safety |
Piezo ignition, flame-failure safety device |
| Waterproof |
Rainproof shell with sealed joints and drainage channels |
| Maintenance |
Wipe-down only — no painting, oiling or sealing required |
| Recyclability |
All-metal aluminum and steel structure, 100% recyclable, mechanically fastened |
| Installation |
Pre-assembled modular structure, anchor fixing on site |
| Application |
Villa courtyards, rooftops, balconies, hotels, resorts, campsites, commercial catering |
| Warranty |
2 years limited |
Project note: RAL color matching, cabinet layout, countertop material and grill configuration are all open to customization against drawings or samples for hotel, resort and residential projects.
Why Partner with VANRIOS
- Direct-from-factory supply: factory-direct B2B pricing from our own outdoor kitchen manufacturing base, with no trading markup.
- Strict quality control: 100% pre-loading inspection of shell alignment, hand crank mechanism, gas circuit and coating adhesion before container loading.
- OEM / ODM support: drawing-based and sample-based customization of dimensions, RAL colors, cabinet modules and appliance cutouts.
- Export-ready packaging: reinforced cartons with edge protection for long-distance sea freight.
FAQ
1. How much maintenance does the olive green finish need?
Wipe-down only. The powder coated all-metal body has no timber to oil or seal and no painted steel to touch up, so there is no annual recoating work.
2. Which parts are recyclable?
The shell frame, SS430 cladding and cabinet bodies are aluminum and steel, both 100% recyclable. Modules are bolted rather than bonded, so the metals separate cleanly at end of life.
3. Does the set require any electricity?
No. The shell opens by hand crank with gas strut assistance and the burners use piezo ignition, so no power supply is needed.
4. How much space does it need when closed?
The closed shell measures W2280 x D840 x H1260 mm with no rear track, so it sits flush against a wall or balcony rail.
5. What is the lead time?
Normally 15 days for samples and 30-45 days for bulk orders, depending on configuration and quantity.