2/2 Way NC Brass Guide Tube Solenoid Valve Stem Armature Plunger

The name system 9 stands for a modular system of solenoid coils, armature systems, solenoid operators. The diameter of the armatures of all valve components is approximately 9 mm. This value is the major characteristic of this type series. The components' efficiency has been increased to the optimum in years of simulation, construction and practical testing. Since the diameter of the armature is a major determining factor, its selection is of great technical importance.

The armature assembly or anchor system is the valve piece of solenoid valve system. An internal stainless steel poppet moves up and down to seal on the top and bottom valve seats. Brando provides armatures in multiple sizes depending on the application’s flow requirement. The OD tube sizes range from 5mm to 30mm and flow ranges from 12 l/min to 165 l/min. The valve seat orifice sizes ranges from 0.6mm to 6.0mm and higher for special applications. Choose the correct material for the application as brando offers tubes in brass and stainless steel.

Solenoid Valve Stem:

Picture	Dimension	Model	S9
		Funtion	2 Way / 3 Way, Normally Closed
		Seat Connection	Flange, Thread
		Core Tube Material	Brass, Stainless Steel
		Seal Material	NBR, FKM
		Voltage	All range of AC and DC available
		Customize Service	Provided, Pls show us sample or drawing

Picture	Dimension	Model	EVI 7/9
		Voltage	12VDC, 24VDC, 24VAC, 110VAC, 220VAC
		Power	DC: 3-8W 6W AC: 4-8VA
		Fitted Armature Plunger	S9
		Fitted Valve	Pneumatic Valve

Brando Solenoid Valve Stem Production Video:

Solenoid Valve Stem Categories:

*According to tube OD: 5-7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, Up to 30mm.

*According to tube material: Brass, Stainless Steel

*According to valve application: Our armatures are widely used in pneumatic, hydraulic, fluid control fields, covering textiles, home appliances, automobiles, refrigeration, dust collector and other automation control industries.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!