2/2 Way NC Circular Seat Solenoid Stem Assembly With No Thread/Magnetic Solenoid Stem

Know more about Application

1.Mainly used for 13.5mm OD,53.5 height solenoid coil

2.Application in dust-removing equipment/dust collector valve

Dust collector valve: The dust collector solenoid valve is a compressed air switch for the dust removal system of the pulse bag filter. Controlled by the output signal of the pulse injection controller, the filter bag is injected one by one and the resistance of the dust collector is kept within a set range to clean the dust to ensure the processing capacity and efficiency of the dust collector

3.Solenoid Stem has a wide use because the lots of species,low price and high quality.Can application for other industry with adjustment

Working principle

The diaphragm divides the pulse solenoid valve into two chambers. When the compressed air is switched on, the compressed air enters the back chamber through the throttle hole. At this time, the pressure of the back chamber will press the diaphragm to close the output port of the valve, and the pulse solenoid valve is in a "closed" state. The electric signal of the pulse injection controller makes the armature of the pulse solenoid valve move, the vent of the back chamber of the valve opens, the back chamber loses pressure rapidly, the diaphragm moves backward, the compressed air is injected through the outlet of the valve, and the pulse solenoid valve is in the "open" state. when the electric signal of pulse jet control device vanishes and the armature of pulse solenoid valve is reset. The outlet of the back chamber is closed, and the pressure of the back chamber rises to make the diaphragm close to the valve outlet, and the pulse solenoid valve is in the "closed" state.

Dimension

1.Tube OD:13.5mm

2.Tube height:53.5mm

3.Item weight:53g

4:Movable core height:28.2mm

5.Depth:29mm

6.Voltage:AC/DC

Specification in the image

Special design

1.wIth no screw thread,only a groove in the surface of the armature.The surface is smooth with no skin needling.

2.Two way two way solenoid stem/armature assembly. with circular seat

3.Magnetic electric valve part.Electric force to hole the movable core down and upward.

4.with interior spring design,improving the conversion rate

5.A unique Seal of movable core:Reddish brown seal

process of manufacuring