2W250-25 2/2 Way AC220vDC24V Direct Acting Air Water Solenoid Valve
2W series small oriffice Fluid Control Valve, also known zero-pressure solenoid valve, the initial state for normally closed,normally open only available for below 3/8", thread size range from 1/8" to 3/8", Din connector type and flying leads type,anti-explosion and anti-water coil are available. With the stalbe quality and wide application, 2W valve is popular with customers, especially in the water treatment system, the 2W valve is used widely.



2W Series 2/2 way Direct Acting Solenoid Valve |
Model | 2W160-10 | 2W160-15 | 2W200-20 | 2W250-25 | 2W350-35 | 2W400-40 | 2W500-50 |
Medium | Air,Water,Oil,Gas |
Operation | Direct Acting |
Type | Normal Close |
Orifice Size(mm) | 16mm | 20mm | 25mm | 35mm | 40mm | 50mm |
CV Value | 4.8 | 7.6 | 12 | 24 | 29 | 48 |
Port Size | G3/8" | G1/2" | G3/4" | G1 " | G1 1/4" | G1 1/2" | G2" |
Operation Fluid Viscosity | Below 20 CST |
Operating Pressure | Air,0~0.7MPA Water,0~0.5MPA Oil,Gas:0~0.5Mpa |
Max Pressure Resistance | 1.0MPa |
Operating Temperature | NBR for -5~80°C and fluororubber for -5~80°C |
Voltage Range | ±10% |
Material of Body | Stainless Steel or Brass |
Material of Oil Seal | NBR,fluororubber |
Materials:
PARTS | MATERIAL |
Body | Cast Bronze/ Forge Brass/Zinc Alloy |
Coil | Special Copper Wire (H) |
Core | Stainless Steel |
Tube | Stainless Steel |
Spring | Stainless Steel |
Plug | NBR.fluororubber .Silicon, PTFE |
Diaphragm | NBR.fluororubber .Silicon |
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some unexpected problems
happen, we hope to solve the problems with buyer through friendly in the following ways:
1, If it is quality problem, buyer can submit argue within 15days after receiving the goods,
buyer must provide photos or video and other evidence to seller for identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one year (not included those
damages coursed by shipping or Man-made damaged ). A 15% restocking fee is
assessed for any products returned in "used" condition. And then we will send a new
product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD) has quality problems, we
will resend a new product in buyer next order; if buyer don’t plan to make a new order in
the near term, buyer can pay the resend shipping cost and ask to resend a new product. If
there is an issue with the products, please contact us– we will solve it as soon as we get
your email.