Bottle to bottle Level PET washing line waste plastic recycling machine

One complete PET bottle washing line maybe consists of:

1. De-Baler: For debale the baled PET bottles or HDPE/PP bottles or other rigid plastics.

2. Belt conveyor: Transport materials

3. Trommel: To separate different impurities, such as sand, stone, metal and so on according to the size of the holes

4. Label remover: To remove the labels which are just covered on bottles and sealed in one side by hot shrinkage air.

5. Metal detector+automaitc separation: For detection of NE metal and protect the granulator and washing components.

6. Manual Separation table: For separate the foreign materials manually and sort out different colors of bottles.

7. Crusher: Crush the materials to flakes of 15mm (two series: one for PET, one for PP/PE)

8. Steam washer: clean the materials in hot water, sometimes with some chemicals

9. Floating washer: For separation of the flakes with a specific density of <1g/cm3 from >1g/cm3 or in contrast to separate the flakes with a specific of > 1g/cm3 form <1g/cm3

(PET >1g/cm3 and PP/PE <1g/cm3)

10. Screw feeder: transport material and as well as for rub them for surfac washing.

11. Fricting washer: Surface wash the materials (two series: one for PET, one for PP/PE)

12. De-watering machine: To get rid of glue, dirties, oil, detergent and etc.

13. Color sorter for plastic flakes.

14. Silo:

1). For separation of dust and fine material to achieve a better quality final product

2). For temporary storage for PET flakes

15. Control Cabinet: For controlling the whole line

Technical parameter of PET BOTTLE RECYCLING machine:

WE CAN DESIGN FOR YOU AS YOUR REQUIREMENT.

After crushing, washing ,drying , the PET flakes can be used to make pellets, packing belt, sheets etc.

If you want to know more information, welcome to contact with us.