building rigid polyurethane foam heat resistant preinsulated thermal insulation pipe supplier for underground
Packaging & Delivery
- Packaging Details
- Packed with the plastic cap to protect the ends of the pipe or as your special requirement.
- Port
- Tianjin Xingang
- Picture Example:
-
- Lead Time :
-
| Quantity(Meters) | 1 - 1000 | 1001 - 5000 | >5000 |
| Est. Time(days) | 15 | 35 | To be negotiated |
-
| | Steel pipe-- insulation layer--HDPE outer protection pipe |
Steel pipe standard and material | 1. GB 20#, Q235B 2. ASTM A53 GrB 3. API Spec 5L 16Mn, X42-X80 |
| | 1. Seamless, 2. Spiral steel pipe( SAW) 3. Straight steel pipe(ERW) |
Material of insulation layer | Bayer/Basf Germany |
| | CFC-free water |
| | Shanghai Jin Fei, Qilu petrochemical,Tianjin zhongsha petrochemical(level 100) |
| | 1. district heating 2. district cooling 3. crude oil transportation 4.cogeneration project |
| | Mainly used for direct buried, and can be used in trenches. |
| | DN25-1800mm(1 inch-72 inch) |
| | Less than 120℃( accidental peak 140 ℃) |
| | Less than 2.5MPa |
| | 1. Unique trinity structure 2. Low thermal conductivity, small the heat loss 3. Water-proof 4. Anti-corrosive |
| | 1. The pre-insulated pipe with alarming line 2. Joint materials 3. Insulation fittings |
Main Indexs of Pre-insulated Pipe |
| Product Name | Product Indexes | Reference Standard | Unit | Standard Requirement |
| | Steel pipe without thermal insulation layer | CJ/T114-4.4.1 | mm | 150-250 |
| Increasing rate of HDPE outer protection pipe | CJ/T114-4.4.2 | % | ≤ 2 |
| Axis eccentricity | CJ/T114-4.4.3 | mm | see clause 4.4.3 |
| Expectation of life | CJ/T114-4.4.4.1 | year | 120℃ 30 years |
| Shear strength(170℃,1450h after aging) | CJ/T114-4.4.4.2 | MPa | (23±2℃)>0.12 (140±2℃) >0.08 |
| Shock resistance | CJ/T114-4.4.5 | 3kg/2m | see clause 4.4.5 |
| Resistance value between alarm line | CJ/T114-4.4.6 | MΩ | more than 20MΩ |
| | Density | CJ/T114-4.2.3.1 | kg/m3 | ≥940 |
| Elongation at break | CJ/T114-4.2.3.4 | % | ≥350 |
| Tensile yield stength | CJ/T114-4.2.3.4 | MPa | ≥19 |
| Longitudinal shrinkage rate | CJ/T114-4.2.3.5 | % | ≤3 |
| Long term Mechanical properties | CJ/T114-4.2.3.6 | 80℃ 4.0MPa | >1500h free from damage |
| The difference of the melt flow rate | CJ/T114-4.2.3.2 | g/10min | ≤0.5 |
| Carbon Black content | CJ/T114-4.2.3.1 | % | 2.5±0.5 |
Polyurethane insulation layer | Density | CJ/T114-4.3.2 | kg/m3 | ≥60 |
| Average pore size | CJ/T114-4.3.1 | mm | ≤0.5 |
| Percentage of close area | CJ/T114-4.3.1 | % | ≥88 |
| Compressive strength | CJ/T114-4.3.3 | MPa | ≥0.3 |
| Water absorption | CJ/T114-4.3.4 | % | Immersion in boiling water 90 minutes, bubble water absorption should be not more than 10% |
| Coefficient of thermal conductivity before aging | CJ/T114-4.3.5 | w/(m.k) | ≤0.033 |
| Cavity | CJ/T114-4.3.1 | | ≤1/3 the thickness of insulation layer |
| | Seamless steel pipe(≤DN150) | GB8163 | 20# | Up to standards |
| Spiral steel pipe (≥DN200) | GB/T9711 or SY/T5037 | Q235B | Up to standards |

