Split Frame Machine

Product Introduction

SFM series machines are available to cut, bevel, counterbore, drill and mill pipes from 2 inch - 84 inch O.D. (50-2133.6mm) on all diameter of carbon steel, stainless steel, and various types of alloy pipes. They are widely used in nuclear power, thermal power, petroleum, chemical plant, natural gas, boiler plant, pharmaceutical factory and other areas.

Industry Application

The SFM Series of Pipe Cutting and Beveling Machines are widely used in long-distance transport pipeline, power plant, nuclear power, petroleum, chemical engineering, natural gas, boiler shop, pharmacy, pipe prefabrication plant, pipeline installation engineering, rush-repair work, etc. Our products play an important role in these fields.

Safety Instructions

■ Keep a good working environment and prevent the operator from slipping or tumbling due to poor lighting, ground oil stain, narrow passage or unreasonable stacking of parts and semi-products;

■ The cooling liquid is erosive, please avoid direct skin contact as much as possible;

■ Goggles, ear defenders and protective boots must be worn when the machine is working, and it is forbidden to work while wearing the gloves. The dust mask also must be worn in the severe environment with heavy dust.

Routine Maintenance

Timely maintenance can extend the life of the machine and make the machine process high-quality bevel. Therefore, keeping good using and maintenance habits are strongly recommended in the daily use.

■ Maintenance and repair must be conducted by professionals.

■ To ensure sound operation of the equipment, using original parts is suggested.

Note: Make sure the equipment is disconnected from power before maintenance.

Report on Comparison of Product Advantages