Highlight: Manual two-piece threaded copper ball valve
Product introduction:
Ball valve is a ball with a circular channel as the opening and closing parts, the ball with the stem rotation to realize the opening and closing action of the valve. The opening and closing part of the ball valve is a perforated sphere that rotates around the axis perpendicular to the channel to achieve the purpose of opening and closing the channel. Ball valves are mainly used for opening and closing pipelines and equipment media.
Ball valves can be closed tightly with only a 90 degree rotation operation and a small torque of rotation. The completely equal body cavity provides the medium with small resistance and straight flow channel.
Product technical parameters:
Nominal Diameter DN (mm) | 15-100 | |
Nominal Pressure PN (MPa) | 1.6-2.5 | |
Test Pressure (MPa) | Strength (water) | 3.8 |
Enclose (Water) | 2.75 | |
Main Components | Valve body | Stainless steel |
Ball | Stainless steel | |
Seat | PTFE | |
Axle | Stainless steel | |
Working temperature | ≤120℃ | |
Medium suitable | Water, steam and oil | |
Connection | BSPT, NPT type |
Product features:
1. Portable unit, easy to remove and maintain, and can be installed at any position;
2. Simple and compact design, light open and close, easy operation.
3. Long service life, can be widely used in petroleum, chemical industry, power generation, paper making, atomic energy, aviation, rockets and other departments and people’s daily life.
4. The fluid resistance is small, and its resistance coefficient is equal to that of the pipe section of the same length.
5. Tight and reliable, the sealing surface material of ball valve is widely used in plastic, good sealing, and has been widely used in vacuum system.
6. Open and close quickly, from fully open to fully closed as long as the rotation of 90°, convenient for remote control.
Our Advantages: