UF-40CS - 41*20*20 - BJVP Internal Gear Pump

Overview:

Internal gear pumps are exceptionally versatile. While they are often used on thin liquids such as solvents and fuel oil, they excel at efficiently pumping thick liquids such as asphalt, chocolate, and adhesives. The useful viscosity range of an internal gear pump is from 1cPs to over 1,000,000cP.

In addition to their wide viscosity range, the pump has a wide temperature range as well, handling liquids up to 750°F / 400°C. This is due to the single point of end clearance (the distance between the ends of the rotor gear teeth and the head of the pump). This clearance is adjustable to accommodate high temperature, maximize efficiency for handling high viscosity liquids, and to accommodate for wear.

[Rotor and idler.] The internal gear pump is non-pulsing, self-priming, and can run dry for short periods. They're also bi-rotational, meaning that the same pump can be used to load and unload vessels. Because internal gear pumps have only two moving parts, they are reliable, simple to operate, and easy to maintain.

Application:

Lubricants, Fuel Oil, Grease, Asphalt, Bitumen, Gluse,Polymer,Resin,Chemical Fiber, Coatings, Detergents, High viscosity product or high temperature product.

Parameters:

Character:

Adjustable clearance, easy satisfied with the changable viscosity ;Enlarged seal chamber for multi type seal interchange ; Enlarged bearing housing for quickly maintenance.

Available Solution:

Packing seal,Mechanical Seal,Cartridge type seal , all kinds of seal types are interchangeable, enlarged bearing housing design for future replacement and quickly maintenance.

Magnetic None Seal pump is also available.

Internal Safety valve , heating jacket,electric heating rod can be supplied.

BJVP can provide a variety of material selection,working scope to meet with application requirement.

Picture: