The GSE fully automatic high precision solder paste printer is a high-end model forSMT high-end application,which can satisfy the printing process requirements of high precision and high speed
| Substrate processing | GSE |
| Maximum board size | 400*340mm |
| Minimum board size | 50*50mm |
| Board thickness | 0.4~6mm |
| Maximum board weight | 3Kg |
| Board edge clearance | 2.5mm |
| Board height | 15mm |
| Transport height | 900±40mm |
| Transport speed | 1500mm/s(Max) Program Control |
| Transport direction | One stage |
| Board clamp | Manual the top clamp |
| Side clamping | |
| Spport System | Magnetic Pin |
| Support Block | |
| Manual up-down table |
| Printing Parameters | GSE |
| Snap-off | 0-20mm |
| Print Mode | One/Twice |
| queegee Type | Rubber/Steel Squeegee Blade(angle 45/55/60) |
| Print Speed | 10~200mm/sec |
| Print Pressure | 0.5~10Kg |
| The template frame size | 470*370mm~737*737mm |
| Cleaning Parameters | |
| Cleaning Methods | Dry,Wet Vacuum three modes |
| Cleaning system | Up Drip type |
| Cleaning stroke | Automatic generation |
| Cleaning position | Post cleaning |
| Cleaning Speed | 10-200mm/sec |
| Cleaning fluid consumption | Auto & Manually adjustable |
| Cleaning paper consumption | Auto & Manually adjustable |
| Machine parameter | |
| Power Source | AC220±10%,50/60Hz2.2KW |
| Air Pressure | 4~6Kgf/cm² |
| AirConsumption | Approx:5L/min |
| Operating Temperature | -20℃~+45℃ |
| Working environment humidity | 30%~60% |
| Machine dimension (without Tower light) | 1460(H) mm |
| Machine Length | 1152(L) mm |
| Machine Width | 1362(W) mm |
| Machine Weight Approx | Approx: 900Kg |
| Equipment load bearing requirements | 650Kg/㎡ |



