Negative Ion Pneumatic Foot Massager PCBA Circuit Board 5V 2A Input Power

Specification

Operation

1. Press the power button, the power indicator light, the first gear indicator light and the time indicator light for 15 minutes will be on. Air pump, valve 1 start to open the work, the foot air bag began to inflate. Display current charge (3 of 3 cells or one or two cells)
2. Add 5 more lights (yellow, red, red, blue, green). When plasma is on, the breath flashes gradually.
3. During the boot process,
4. Press the force key, then first gear, second gear, third gear cycle,
5. Press the time key, then 5 minutes, 10 minutes, 15 minutes cycle (backward time to turn off all output, standby).
6. Press the fan, heating, anion and LED keys, and the corresponding indicator light and output are all on and off.
7. All outputs (fan, heater, anion, LED, air pump, air valve) and batteries are connected to the power panel.
8. Battery with 2600mAh*2.
9. When starting to work, follow the football-> football-> football-> football-air bag at the same time as the football-> football-air bag. Each air bag is filled in three times, that is, filled with -> pressure-retaining -> pressure-retaining -> pressure-retaining -> pressure-retaining -> pressure-retaining -> deflating.

Note: This current will vary with the pressure, and this current value is the maximum value under the actual test condition (the test condition was male mode 3, and the test result was massaged by the tester by hand, different people will have some deviation).

Service

1. PCB Development and Design:

2. PCB Manufacturing From 1 to 32 Layers:

3. Component Sourcing:

4. PCB Assembly:

5. Write Program for Customers:

6. PCB/ PCBA Test.Semi-Automatic

We have

1 Professional factory with more than 10-year-experience

2 High quality and competitive price.

3 OEM/ODM service can be accepted

4 7*24h after-sales service.

5 Warranty:12 months

6 100% inspection before arranging the shipment