Original Medical Parts of Mindray N1 monitor power interface with silicone sleeve wiring 009-008383-00-2

■ Product Describe

The Mindray N1 monitor power interface cable, part number 009-008383-00-2, is the core connector for the device's power input. It consists of a power plug, a silicone protective sleeve, a multi-core cable, and a terminal connector. This cable transmits external power to the device's internal power management system, which in turn powers the device's key components, serving as the first line of defense for ensuring stable operation of the monitor.

This cable is specifically designed for the Mindray BeneVision N1 portable monitor and is fully compatible with this series of monitors.

■ Product advantages

1. Safe Power Transmission

The interface cable carries a maximum current of 3A and can stably transmit the 30-50W power required by the device (typical power consumption of the N1 host). Line resistance is ≤0.5Ω, ensuring voltage loss ≤1V, preventing device restarts or parameter abnormalities due to insufficient power.

2. Multi-Protection Isolation

The silicone sheath of the interface cable tightly wraps the wires to provide physical isolation. Its insulation resistance is ≥100MΩ (DC 500V test) and its breakdown voltage is ≥2500V, effectively preventing leakage risks.

3. Anti-Interference Shielding

The interface cable features a braided tinned copper mesh shield (90% coverage) that attenuates 80% of electromagnetic interference within the 10MHz-1GHz frequency range, preventing high-frequency noise from the mains from entering the device through the power line. This ensures the stability of weak signal measurements such as ECG and blood oxygen levels. 4. Mechanical Protection and Adaptability

The silicone sleeve is resistant to bending and can withstand over 10,000 bending cycles. The terminal interface uses a snap-on design, with an insertion and removal force of ≥15N after insertion into the host, preventing accidental removal and supporting blind insertion.

■ Products Parameters

■ FAQ​

Q1: Is it normal for the power connector to heat up?

A1: During normal operation, slight heating of the connector due to heat generated by the accessories is normal. If it feels hot to the touch, it may indicate poor contact (such as a loose plug) or increased resistance due to aging of the wiring. Immediately disconnect the power cord and inspect, and replace the component if necessary.

Q2: Will a damaged silicone sleeve affect use?

A2: Yes. A damaged silicone sleeve may degrade insulation performance, posing a risk of electrical leakage. It also loses mechanical protection, making the wiring susceptible to strain and damage. It is recommended that any damage be replaced immediately to avoid clinical safety hazards.

Q3: How can I purchase this component?

A3: Please contact our sales staff for product details and purchase instructions. Our sales staff will provide instructions on how to purchase the product.