Mindray BeneHeart D6 Defibrillator Printer TR6F-30-67310

Brief Introduction

The defibrillator printer is a device used to print patient test reports. When the record button is pressed, the task can be started. There is an indicator light on the printer. When the indicator light is on, it is in a normal working state. If the indicator light is flashing, It means the recorder is malfunctioning or out of paper. The printer includes a paper outlet, a recorder door and a wrench, which is used to open the recorder door. The printer is a very important piece of equipment in the defibrillator. It can record the patient's vital signs in a timely manner and is one of the indispensable equipment.

Feature

Mindray BeneHeart D6 Defibrillator Printer is a thermal array printer that can print patient information, measurement data, review data, etc. The printer can manually turn on the real-time waveform record output, and the record will be turned on automatically when an event is triggered. The recorder will also be turned on for alarm records such as parameter exceeding the standard or arrhythmia. If you want to open the recorder, you can select the button on the recorder panel to start real-time recording, or there is a record button in the main menu window. When the alarm switch and alarm record of a certain parameter are both turned on, once an alarm occurs, the defibrillator printer will be automatically triggered to automatically record an alarm record. The printer automatically stops recording when the task is completed, paper is missing, a technical failure occurs, or the defibrillator operating mode is changed. When the printer speed is too fast, you can adjust the print output speed in the menu.

Install printing paper: Unscrew the wrench on the upper right corner of the printer door, open the printer door, then load the printing paper into the paper cavity, align the paper head outside the paper outlet, close the printer door, and check whether the position of the printing paper is consistent with the paper output. Oral alignment.

Note: The paper used by this printer is thermal printing paper. If it is not thermal printing paper, it may result in inability to print, poor print quality or damage to the thermal print head. Do not pull the printing paper outward during printing, otherwise the printer may be damaged.

Clean

Product Details Picture

Thank you for taking the time to pay attention to our Mindray BeneHeart D6 Defibrillator Printer TR6F-30-67310 product.