8mm 360° Total Rotational Angle Incremental Encoder With Push Switch
Feature:
• Lathe machining, die-cast metal shaft is strong and durable, not easy to break.
• Choose metal, PA66/PBT material for shell, moisture-proof, moisture-proof and high temperature resistance.
• Silver-plated, tin-plated pins easy to solder, anti-oxidation
Electrical specifications:
| Items | Specifications | Condition |
| Voltage rating | DC 10V | |
| Current rating | 2.5mA | |
| Insulation resistance | 100MΩ Min. | @ DC 250V |
| Dielectric strength | No subversion on insulating material | AC300V (50~60Hz) for 1 minute |
| Output signal | Refer to attached drawing | |
| Number of pulses | 10 | Output total pulses of rotate one circle(360°) |
| Phase difference | Td = T / 4 ± T / 6 | In no detent circumstances |
Mechanical Characteristics:
| Items | Specifications | Condition |
| Rotational torque (gf.cm) | 50~200gf.cm | |
| Push-pull strength | Push/pull 10Kgf | 10Kgf.cm for 15 seconds |
| Total rotational angle | 360° | |
| Number of detent | 20 | Turn a week (360 °) positioning number |
Durability:
| Items | Specifications | Condition |
| Rotational life | Encoder shall be operated 30,000 cycles without load | 16~20 times per minute |
| Waterproof level | IP67 | |
| Operating temperature | -30℃~80℃ | |
Dimension:
