Power Plant Water Treatment Chemical Flocculant Cationic Polyacrylamide Powder

Usage Precautions

1. Dissolution Process
   • Use clean tap water or softened water for dissolution, with water temperature controlled at 20-40°C (avoid high temperatures causing molecular chain degradation).
   • Stir at a moderate speed (60-200 rpm) for 60-90 minutes to ensure complete dissolution and prevent agglomeration.
2. Dosing Control
   • Adjust the dosage according to water quality characteristics (e.g., suspended solid concentration, charge properties), and it is recommended to determine the optimal dosage through beaker tests.
   • When used in combination with inorganic flocculants, add PAC and other inorganic agents first, then add CPAM (with a 1-2 minute interval) to avoid reagent interaction and failure.
3. Storage and Safety
   • Store in a dry, ventilated warehouse, avoiding moisture and direct sunlight, with a shelf life of typically 2 years.
   • Wear gloves and protective goggles during operation. If the powder comes into contact with skin or eyes, rinse immediately with water.

6. Selection and Technical Parameters Reference

1. Cationic Degree: 10%-70% (selected based on the concentration of negatively charged particles in water; high-cationic-degree products are suitable for high-turbidity wastewater).
2. Molecular Weight: 8-12 million (high-molecular-weight products have strong bridging ability, suitable for sludge dewatering; medium-low molecular weight products are suitable for wastewater pretreatment).
3. Dissolution Time: ≤90 minutes (use after complete dissolution; undissolved particles will block the dosing pipeline).

1.Our factory Jiangsu Hengfeng Polymer,as a leading 25-years history of water treatment polyacrylamide factory
2.We are dedicated to providing high-quality water treatment solutions.
3.Our expertise in producing polyacrylamide ensures that Our clients receive the most effective and reliable products for their water treatment needs.