The design of the high-altitude diffusion oxygen supply system is simple, and the operation and maintenance cost is low. The system architecture is relatively simple, mainly consisting of an oxygen generator (usually a medium-sized molecular sieve oxygen generator), conveying pipelines, and diffusion devices. No complex pressure reduction or monitoring systems are required. During construction, only the oxygen production volume needs to be calculated based on the space area. The pipeline layout is flexible, the engineering volume is small, and the cost is relatively low (for example, in hotel guest rooms, the cost of single-room renovation is much lower than the construction of hospital oxygen supply terminals). Later operation and maintenance are also simpler. Only regular checks on the operation status of the oxygen generator and cleaning of the diffusion device filters are required. No professional medical personnel are needed to operate. It is suitable for non-medical places such as hotels and office buildings in high-altitude areas.
| Model | Purity | Flow | Outlet |
|---|---|---|---|
| LMO-1 | 93±2% | 1Nm3/h | Regular outlet pressure 1-5Mpa adjustable |
| LMO-5 | 93±2% | 5Nm3/h | |
| LMO-10 | 93±2% | 10Nm3/h | |
| LMO-15 | 93±2% | 15Nm3/h | |
| LMO-20 | 93±2% | 20Nm3/h | |
| LMO-25 | 93±2% | 25Nm3/h | |
| LMO-30 | 93±2% | 30Nm3/h | |
| LMO-40 | 93±2% | 40Nm3/h | |
| LMO-50 | 93±2% | 50Nm3/h | |
| LMO-60 | 93±2% | 60Nm3/h | |
| LMO-70 | 93±2% | 70Nm3/h | |
| LMO-80 | 93±2% | 80Nm3/h | |
| LMO-90 | 93±2% | 90Nm3/h | |
| LMO-100 | 93±2% | 100Nm3/h | |
| LMO-110 | 93±2% | 110Nm3/h | |
| LMO-120 | 93±2% | 120Nm3/h | |
| LMO-130 | 93±2% | 130Nm3/h | |
| LMO-140 | 93±2% | 140Nm3/h | |
| LMO-150 | 93±2% | 150Nm3/h | |
| LMO-180 | 93±2% | 180Nm3/h | |
| LMO-200 | 93±2% | 200Nm3/h |