HIH-4000-003 HIH4000-003 Humidity Sensor Medical equipment
DESCRIPTION;
The HIH-4000 Series Humidity Sensors are designed specifically for high volume OEM (Original Equipment Manufacturer) users.
Direct input to a controller or other device is made possible by this sensor’s near linear voltage output. With a typical current draw of only 200 µA, the HIH-4000 Series is often ideally suited for low drain, battery operated systems.
Tight sensor interchangeability reduces or eliminates OEM production calibration costs. Individual sensor calibration data is available.
The HIH-4000 Series delivers instrumentation-quality RH (Relative Humidity) sensing performance in a competitively priced, solderable SIP (Single In-line Package).
Available in two lead spacing configurations, the RH sensor is a laser trimmed, thermoset polymer capacitive sensing element with on-chip integrated signal conditioning.
The sensing element's multilayer construction provides excellent resistance to most application hazards such as wetting, dust, dirt, oils and common environmental chemicals.
FEATURES:
Molded thermoset plastic housing
Near linear voltage output vs % RH
Laser trimmed interchangeability
Low power design
Enhanced accuracy
Fast response time Stable
low drift performance
Chemically resistant
POTENTIAL APPLICATIONS:
Refrigeration equipment
HVAC (Heating, Ventilation and Air Conditioning)
equipment
Medical equipment
Drying
Metrology
Battery-powered systems
OEM assemblies
Power supply voltage - Maximum | 5.8V |
Minimum operating temperature | -40 ° C |
Maximum operating temperature | + 85 ° C |