4HYT 0~1000ppm hydrogen sensor for gas detectors
IMPORTANT NOTE: Connection should be made
via PCB sockets only. Soldering to the pins will
seriously damage your sensor.
Cross-sensitivity Data
CiTiceLs may exhibit a response to certain gases in a sample other than the target gas. 4HYT CiTiceLs have been
tested with a number of commonly cross-interfering gases and the results are given below. The table shows the typical
response to be expected from a sensor when exposed to a given test gas concentration (relevant to safety, e.g. TLV
levels).
| Bias Voltage | Not required |
| Repeatability | 2% of signal |
| Output Linearity | Linear |
| Weight | 5g (approx.) |
| Storage Life | Six months in CTL container |
| Position Sensitivity | None |
| Recommended Storage Temperature | 0-20°C |
| Warranty Period | 12 months from date of despatch |
