Product Description:

YJJ H2S 2000 AN062000 0-2000PPM Gas Sensor Is A Device Used For Detecting Concentration Of Hydrogen Sulfide (H2S) Gas

Features:

Poisoning
Sensorix cells are designed for operation in a wide range of environments and harsh conditions. However, it
is important that exposure to high concentrations of solvent vapors is avoided, both during storage, fitting
into instruments, and operation. When using sensors with printed circuit boards (PCBs), degreasing agents
should be used before the sensor is fitted.
Recycling
At the end of the product’s life, do not dispose of any electronic sensor, component or instrument in the
domestic waste, but contact the instrument manufacturer or Sensorix for disposal instructions. Sensorix will
take back sensors for professional recycling.
Every effort has been made to ensure the accuracy of this document at the time of printing. In accordance with the company’s policy of
continued product improvement Sensorix GmbH reserves the right to make product changes without notice. No liability is accepted for any
consequential losses, injury or damage resulting from the use of this document or from any omissions or errors herein. The data is given
for guidance only. It does not constitute a specification or an offer for sale. The products are always subject to a program of improvement
and testing which may result in some changes in the characteristics quoted. As the products may be used by the client in circumstances
beyond the knowledge and control of Sensorix GmbH, we cannot give any warranty as to the relevance of these particulars to an
application. It is the clients’ responsibility to carry out the necessary tests to determine the usefulness of the products and to ensure their
safety of operation in a particular application.
Performance characteristics on this data sheet outline the performance of newly supplied sensors. Output signal can drift below the lower
limit over time.

Specifications: