7CO-1000 Electrochemical Carbon Monoxide (CO) Gas Sensor for Industrial Safety Monitoring Consumer Safety Devices
Key Features:
- High CO Selectivity: Optimized electrode and electrolyte design minimizes interference from common gases , ensuring accurate CO measurement.
- Stable Three-Electrode Design: Reduces polarization effects and zero drift, improving reliability for continuous 24/7 monitoring.
- Low Power Consumption: Suits battery-powered portable detectors, with minimal current draw during operation.
- Easy Integration: Standard electrical parameters (bias voltage, load resistor) and compact form factor simplify integration into existing detection systems.
- Wide Environmental Adaptability: Performs reliably across a broad temperature and humidity range, suitable for indoor/outdoor industrial and residential use.
Typical Applications:
- Industrial Safety Monitoring: Factories, mines, refineries, and construction sites where CO may be generated from combustion or chemical processes.
- Consumer Safety Devices: Home CO alarms, portable gas detectors for households, and vehicle exhaust detection tools.
- Fixed Gas Alarm Systems: Permanent installations in warehouses, production areas, and public buildings to trigger alarms at unsafe CO levels.
- Environmental Monitoring: Urban air quality stations and industrial emission testing equipment.
- Medical & Rescue Equipment: Handheld detectors for emergency responders and confined space entry teams.
| Target Gas | Carbon Monoxide (CO) |
| Nominal Measurement Range | 0 – 1000 ppm (standard) |
| Maximum Overload | 5000 ppm CO |
| Sensitivity (Typ.) | 0.15 ± 0.03 µA/ppm |
| Resolution | 1 ppm |
| Response Time (T90) | ≤ 30 seconds |
| Repeatability | ±2% of full-scale (FS) signal |
| Recommended Bias Voltage | +200 mV |
| Recommended Load Resistor | 10 Ω |
| Operating Temperature Range | -20°C to +50°C |
| Storage Temperature Range | 0°C to +20°C |
| Operating Humidity Range | 15% – 90% RH (non-condensing) |
| Operating Pressure Range | Atmospheric pressure ±10% (86 – 106 kPa) |
| Baseline Offset (Clean Air) | 0 to +5 ppm equivalent |
| Long-term Sensitivity Drift | < 2% signal loss per month |
| Expected Operating Life | 2 – 3 years (in air, 20°C, 50% RH) |
| Storage Life | 6 months (original sealed packaging) |
| Package Type | Standard electrochemical sensor package (compatible with most detectors) |
| Weight | Approx. 25 g |
