DN25 DN50 Electrical Ball Valve 12v/24v 220vac Three Wire Two Control Central Air Conditioning Electric Valve

★Introduction –The electric valve is to use an electric actuator to control the valve, so as to realize the opening and closing of the valve. It can be divided into upper and lower parts, the upper part is the electric actuator, and the lower part is the valve.

★Function –Analog quantity regulation for liquid, gas and wind system pipeline medium flow;In the control of large valves and wind systems, electric valves can also be used for two-position switch control.

★Application– Canning / bottle system, beer brewing and beverage technology chemical industry, fluid mixing device, food industry concrete and cement industry, vacuum technology, water treatment device, pneumatic device, laundry room, medical equipment, boiler feed water, process control and other fields

★Installation–

1,This valve is mainly used to adjust the water flow. Please make sure that the direction of the water flow in the valve body is correct when installing.
2,Confirm that the connected voltage meets the requirementsof the driver.
3,The connected line meets the requirements of the site and is wired by professional technicians.
4,When installing or repairing, cut off the power supply to prevent damage to the equipment or electric shock.
5. Please make sure that the water quality in the pipeline meets the air-conditioning pipeline water standard.
6.Before leaving the installation site, you should observe at least three complete operating cycles of the driver. If the installation or wiring is correct but the driver does not work properly, you need to change the driver or contact the nearest supplier.

Details

Technical Sheet

More models