C9200-24T-E Overview
 
 The Cisco C9200-24T-E is a high-performance enterprise switch designed to handle robust network management needs. As part of the Catalyst 9200 series, the C9200-24T-E stands out for its versatility and advanced features. This Cisco switch is engineered to deliver seamless and reliable connectivity, making it an essential component for any enterprise network setup.
 

 
 
 C9200-24T-E Specification
       Series
 Catalyst 9200 Series
    Form Factor
 1RU Fixed Switch
        Port Configuration
 24 × 10/100/1000BASE-T (RJ45), 4 × 1G SFP Uplinks (C9200-NM-4X1G module included)
       Switching Capacity
 96 Gbps
        Dimensions (H × W × D)
 Base: 1.73 × 17.5 × 13.8 in (4.4 × 44.5 × 35.0 cm); With FEP/Fan: 1.73 × 17.5 × 15.4 in (4.4 × 44.5 × 39.1 cm)
    Power Supply
 125W AC (PWR-C5-125WAC or PWR-C6-125WAC)
       Input Voltage
 100–240V AC, 50/60Hz
    PoE Support
 Not supported (non-PoE model)
        IPv4 Routing
 16,000 routes
    IPv6 Routing
 8,000 routes (software-assisted)
       QoS
 8 queues per port, DSCP/CoS marking
    Licensing
 Essentials (pre-installed)
       Minimum IOS-XE Version
 16.12.1
    Key Protocols
 Static Routing, RIPv1/v2, OSPF, EIGRP (limited scale), Basic QoS and ACLs
       Operating Temperature
 32°F to 104°F (0°C to 40°C)
    Humidity
 5% to 90% non-condensing
       Altitude
 Up to 10,000 ft (3,000 m)
    MTBF
 587,800 hours (~67 years)
       Hot-Swappable Modules
 Fan tray, power supplies
    Management
 CLI (Cisco IOS-XE), Web UI (Catalyst 9200 Web Interface), SNMP v2c/v3, NetFlow (hardware-accelerated)
       Compliance
 Safety: UL 60950-1, EN 60950-1; EMC: FCC Part 15 Class A, EN 55032 Class A; RoHS: Compliant
    Power Consumption (No PoE, 115V AC)
 Idle: 33.09W; 50% Traffic: 36.20W; 100% Traffic: 42.27W
       Power Consumption (No PoE, 230V AC)
 Idle: 33.15W; 50% Traffic: 36.06W; 100% Traffic: 42.01W
    Acoustic Noise (with AC Power Supply)
 LpA: 42 dB typical, 45 dB max; LwA: 5.3 B typical, 5.6 B max
          