EFP To Fiber with LEMO power supply includes a Camera Optic Adaptor and a Optic Base Station. The system transports a 3G/HD-SDI signal from the camera to the Base Station and a return video (3G/HD-SDI), Sony or Panasonic Remote control data, TC/BB/Genlock, intercom(Camera end can be connected professional 4-pin or 5-pin XLR headset, OB end can be connected Clearcom or RTS , etc intercom main station), tally(One color or two colors can be selected). Remote camera power supply (14VDC up to 150 Watts).The system puts all of the signals needed for multi-camera 3G/HD-SDI production on a SMPTE hybrid cable, insuring robust, trouble-free connectivity on any studio or remote production.
Features
Specifications:
General index
| Work Temp | -25°C to 55°C | 
| Storage Temp | -40°C to 85°C | 
| humidity | 0 ~ 95% (non-condensing) | 
| Camera Optic Adaptor | |
| Input power | DC 11~19V | 
| Power consumption | <10W | 
| Net weight | 1kg | 
| Appearance size | 188mm*116mm*45mm (without V-mount / A-mount) | 
| Optic Base Station | |
| Input power | AC90~240V | 
| Power consumption | <10W | 
| Net weight | 3kg | 
| Appearance size | 19” 1U standard rack mount | 
Optical:
| Wavelength | 1310nm / 1550nm / CWDM | 
| Output Power | -6~-1dBm | 
| Rx sensitivity | <-18dBm | 
| Transmission Distance | SMPTE hybrid cable 300+m | 
| Optical connector | Lemo SMPTE 304 / Neutrik OpticalCON DUO | 
SDI input/output:
| Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M | 
| Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s | 
| Cable Equalization | 
			 Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s  | 
		
| SDI interface | BNC 75 Ohm | 
Intercom:
| Camera Optic Adaptor | |
| Interface | 4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack | 
| Microphone | Mic inputs with mute and pre-amps | 
| Headphone | with volume up or down | 
| Optic Base Station | |
| Interface | 
			 3pin XLR Female/Male: Party line audio for Clearcom and RTS Intercom main station DB9(Male): Line level audio input and output,  | 
		
Tally:
| Camera Optic Adaptor | |
| Interface | 4pin air head or 3pin mini XLR | 
| Output | Dry Contact Closure or wet LED+/- | 
| 
			 On: short or LED on Off: open or LED off  | 
		|
| Optic Base Station | |
| Interface | DB9(Male) | 
| Input | Dry Contact Closure or TTL | 
| On: short to GND or TTL low Off: open or TTL high | |
Remote:
| Camera Optic Adaptor | |
| Interface | 8pin sony’s or 10pin Panasonic’s remote interface | 
| Data | RS422 /RS232/RS485 | 
| Optic Base Station | |
| Interface | DB9(Female) / 8pin sony’s 10pin Panasonic’s remote interface | 
| Data | RS422 /RS232/RS485 | 
Panel diagram: