2-ch SDI with 10/100/1000 Gigabit Ethernet To Fiber Optic Converter is an ideal and economic solution for broadcasting or surveillance applications. It receives 2ch 3G/HD/SD-SDI electrical input, perfectly converts electrical SDI signal to single mode optic SDI signal. It supports transmission image of SDTV (143-540Mbps), HDTV (1.485Gbps) and HDTV (3Gbps, 1080p60).
Both transmitter and receiver provide equalizing and reclocking at input unit in order to re-construct the signal for consistent quality. Besides, with Transwan advanced fiber technology, VSDI can easily pass pathological pattern to prove its complete transmission.
Specifications:
| SDI input/output | ||
| Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M | |
| Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s | |
| Cable Equalization |
Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
|
| SDI interface | BNC 75 Ohm | |
| Fiber interface | ST/SC/FC | |
| Number of tranmitter channel | 2 | |
| Transmitter wavelength | CWDM wavelength optional | |
| Transmitter output power | -5~0dBm(0±3dBm optional) | |
| Number of receiver output | 2 | |
| Receiver sensitivity | -18dBm~0 dBm | |
Ethernet:
| Work mode | Full duplex/half duplex |
| Data Rate | 10/100/1000 Mbps(AUTO) |
| connection terminal | RJ45 |
| General index | ||
| Input power | DC 5V2A | |
| Power consumption | 8W | |
| Work Temp | -20°C to 55°C | |
| Storage Temp | -40°C to 85°C | |
| humidity | 0 ~ 95% (non-condensing) | |
| Net weight | 2.5KG/pair | |
| Dimensions | 168mm×154mm×45mm | |