*Sony IMX291 sensor
*usb3.0 interface
*Use starlight camera
*Good night vision effect, low illumination
*Support wide dynamic
*120 frames per second, excellent dynamic effect
*Suitable for security monitoring high dynamic applications
Specification
| Model No | SNS-291-V1.0 |
| Sensor | 1/2.8’’ SONY IMX291 CMOS |
| Pixel | 2 Mega Pixel |
| Most effective pixels | 1945(H) x 1109(V) |
| Pixel Size | 2.9µm x 2.9µm |
| Chroma | Color |
| Compression format | MJPEG / YUV2 (YUYV) |
| Resolution & Frame rate | See above |
| Shutter Type | Electronic rolling shutter |
| Focus type | Fixed focus |
| Microphone | Built-in |
| Dynamic range | 72dB |
| Sensitivity | >= 2000mV |
| Interface type | USB2.0 high speed |
| Adjustable parameter | Brightness/Contrast/Color saturation/Hue/Definition/ |
| Lens | Focal length: 3.6MM |
|
| Lens Size: 1/2.8 inch |
|
| FOV: 90° |
|
| Thread Size: M12*P0.5 |
| Audio frequency | Optional |
| Power supply | USB BUS POWER |
| Power consumption | DC 5V, 150mA |
| Main chip | DSP/SENSOR/FLASH |
| Auto Exposure Control (AEC) | Support |
| Auto White Balance (AEB) | Support |
| Auto Gain Control (AGC) | Support |
| Dimension | 38mm*38mm (compatible with 32mm*32mm) |
| Storage temperature | -20°C to 70°C |
| Operating temperature | 0°C to 60°C |
| USB cable length | Default |
| Support OS | WinXP/Vista/Win7/Win8/Win10 |


Shenzhen Sinoseen Technology Co.,Ltd
China top 10 camera module manufacturer
We customize all kinds of USB/MIPI/DVP camera module as per your request
FAQ:
Q1. How to choose the right camera module?
A: Please tell us your specific needs, such as application scenarios, resolution, size, and lens requirements. We will have a professional team of engineers to assist you in choosing the most suitable camera module.
Q2. How to start proofing?
A: After confirming all the parameters, we will draw a drawing to confirm the details with you. Once the drawing is confirmed, we will arrange a proofing.
Q3: How do I send the payment?
A: Currently we accept T/T bank transfer and Paypal.
Q4: How long does it take to make a sample?
A: If it is a USB camera module, it usually takes 2-3weeks, if it is a MIPI or DVP camera module, it usually takes 10-15days.
Q5: How long will it take to receive the sample after it is ready?
A: After the samples have been tested and there is no problem, we will send the samples to you via DHL FedEx UPS or any other courier methods, usually within a week.