Remove stripped micro screws from phones and electronics with the 2UUL SD90 carbide extractor drill set. Two-step drill & extract system with a solid brass collet handle.




- Two-step extraction system — One carbide bit cuts a clean pilot hole in the damaged head; one serrated extractor bit grips it and reverses the screw out. Two bits, one handle, no tool-swapping mid-job.
- Tungsten carbide, abrasion-resistant — Ground from tungsten carbide so the cutting edges survive repeated use and bite into hardened or thread-locked screw heads instead of skating over them.
- Effortless grinding, quick removal — Fine-toothed geometry removes material fast and bites early. You spend seconds on the screw, not minutes.
- Solid brass collet handle — A knurled brass body gives you fingertip control and a firm, non-slip grip. No drill, no trigger, no torque spike.
- Fixing bolt lock — The side fixing bolt clamps the bit dead-straight in the collet. No wobble, no wandering, no scratched frame.
- Built for micro screws — The go-to fix for stripped iPhone bottom screws, plus pentalobe, Phillips and Torx screws on tablets, laptops, drones, cameras and wearables.
- Pocket-sized and workshop-ready — Ships in a clear 54 × 32.5 × 20 mm hinged case, 11 g net. Toss it in your repair pouch and it's there when you actually need it.

| Attribute |
Detail |
| product name |
Stripped Screw Extractor Drill Set |
| Brand |
2UUL |
| Model / Code |
SD90 |
| Bit material |
Tungsten carbide |
| Handle material |
Brass |
| Handle type |
Knurled collet with side fixing bolt |
| Bit count |
2 (1 × drill bit, 1 × extractor bit) |
| Package size |
54 × 32.5 × 20 mm |
| Gross weight |
21 g |
| Net weight |
11 g |
| Storage |
Clear hinged plastic case |
| Country of manufacture |
China |
| Best for |
Micro screws on phones, tablets, laptops and small electronics |