Industrial Membrane Separation Nitrogen Generator On-site N2 System 100Nm3/h 99% Purity
Industrial Membrane Separation Nitrogen Generator - On-site N2 System
This industrial membrane separation nitrogen generator produces high-purity nitrogen on site with advanced hollow fiber membrane technology, delivering 100Nm3/h at 99% purity for laser cutting, electronics, food packaging and chemical blanketing applications.
Working Principle
Compressed air passes through hollow fiber membrane bundles. Oxygen and water vapor permeate the membrane fibers faster than nitrogen, producing a continuous, dry nitrogen stream at the outlet without regeneration cycles or adsorbent replacement.
Key Features
- Industrial membrane separation technology: no moving parts inside the separator, long service life
- Instant start-up: reaches rated purity within minutes, ideal for intermittent duty
- Low maintenance: only pre-filter elements need periodic replacement
- Fully automatic PLC control: purity monitoring and alarm output as standard
- Compact skid design: integrated compressor, dryer, filters and membrane module
Technical Specifications
| N2 Capacity |
100 Nm3/h |
| N2 Purity |
99% (adjustable 95%-99.5%) |
| Working Pressure |
0.8-1.3 MPa |
| Inlet Air Quality |
ISO 8573-1 Class 1.4.1 |
| Pressure Dew Point |
-40 deg C |
| Membrane Type |
Hollow fiber polysulfone |
| Membrane Life |
10-15 years |
| Power Supply |
380V/50Hz or customized |
Applications
- Laser cutting
- SMT reflow soldering
- Food and beverage packaging
- Pharmaceutical blanketing
- Chemical tank purging
- Heat treatment
Customized capacity and purity available. Contact us for a free technical proposal.