6J13 Enameled Bare Strip Copper Manganese Alloy CuMn Resistance Ribbon
Product Description
Copper Manganin widely used for Shunt resistor with the highest requirements, Copper Manganin has been used in
precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers
and resistance standards.
Chemical Content, %
Ni | Mn | Fe | Si | Cu | Other | ROHS Directive |
Cd | Pb | Hg | Cr |
2~5 | 11~13 | <0.5 | micro | Bal | - | ND | ND | ND | ND |
Mechanical Properties
Max Continuous Service Temp | 0-100ºC |
Resisivity at 20ºC | 0.44±0.04ohm mm2/m |
Density | 8.4 g/cm3 |
Thermal Conductivity | 40 KJ/m·h·ºC |
Temp Coefficient of Resistance at 20 ºC | 0~40α×10-6/ºC |
Melting Point | 1450ºC |
Tensile Strength(Hard) | 585 Mpa(min) |
Tensile Strength,N/mm2 Annealed,Soft | 390-535 |
Elongation | 6~15% |
EMF vs Cu, μV/ºC (0~100ºC) | 2(max) |
Micrographic Structure | austenite |
Magnetic Property | non |
Hardness | 200-260HB |
Micrographic Structure | Ferrite |
Magnetic Property | Magnetic |