72V 105Ah LiFePO4 Electric Vehicle Battery Pack – 7560Wh Deep Cycle Module

This MEISAEN 72V 105Ah LiFePO4 battery pack is a high-capacity deep cycle power solution engineered for electric vehicles and light EV applications. With 7560Wh of energy storage and automotive-grade lithium iron phosphate cells, it delivers exceptional thermal stability, intrinsic safety, and a cycle life exceeding 3000 cycles at 80% depth of discharge.

Key Features

• Automotive-Grade LiFePO4 Cells: Prismatic lithium iron phosphate cells offer superior thermal runaway resistance compared to NMC chemistry. No risk of fire or explosion under overcharge, puncture, or short circuit conditions. Ideal for passenger-carrying EV applications where safety is paramount.
• 7560Wh Massive Energy Capacity: 72V nominal voltage with 105Ah capacity delivers extended range for electric vehicles. Capable of powering 3000W–7000W motor systems with consistent voltage output throughout the discharge curve.
• 150A Smart BMS Protection: Advanced Battery Management System provides comprehensive protection: overcharge, over-discharge, over-current, short circuit, temperature cutoff, and active cell balancing. LED status indicator with fault code display for easy diagnostics.
• 3000+ Deep Cycles: LiFePO4 chemistry delivers 4* the cycle life of NMC and 10* that of lead-acid batteries. 10+ year design life reduces total cost of ownership significantly.
• IP65 Rated Steel Enclosure: Heavy-duty SPCC steel casing with anti-corrosion powder coating and sealed silicone gaskets protects against dust, water spray, and vibration in demanding operating environments.
• Parallel Ready: Supports up to 4 packs in parallel for 420Ah total capacity (30.2kWh), scaling from light EVs to commercial fleet vehicles.

Technical Specifications

Safety Advantages of LiFePO4

Unlike NMC and NCA lithium chemistries, lithium iron phosphate (LiFePO4) features a stable olivine crystal structure that resists thermal runaway even under severe abuse conditions. Independent testing demonstrates LiFePO4 cells pass nail penetration, overcharge to 10V, and short circuit tests without fire or explosion. This makes MEISAEN 72V 105Ah packs the safer choice for electric vehicles carrying passengers.

Certifications & Compliance

This battery pack is CE, RoHS, UN38.3, MSDS, and IEC 62619 certified. Every unit undergoes 100% capacity testing, BMS function verification, insulation resistance testing (≥100MΩ at 500V DC), and 24-hour aging test before shipment. Full UN38.3 test summary and MSDS documentation included for international shipping compliance.

Packaging & Logistics

Each battery pack is secured in a custom EPE foam-lined plywood case and shipped in a fumigated export-grade wooden crate. Dangerous goods shipping compliant with IATA Section II (PI965) and IMDG Code SP188 regulations.

Applications

Electric cars (LSV/NEV), electric tricycles, electric golf carts, electric sightseeing vehicles, electric utility vehicles, electric forklifts, AGV robots, and off-grid solar energy storage systems.