Aruba 2930F 48G PoE+ 4SFP Network Switch
High-performance 48-port Gigabit PoE+ switch with 4 SFP uplink ports, designed for enterprise networking applications requiring reliable power over Ethernet capabilities.
Key Specifications
| Model |
JL262A Aruba 2930F 48G PoE+ 4SFP Switch |
| Transmission Rate |
10/100/1000Mbps |
| Communication Mode |
Full-Duplex / Half-Duplex |
Port Configuration
| I/O Ports |
48 RJ-45 autosensing 10/100/1000 PoE+ ports Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3at PoE+ Duplex: 10BASE-T/100BASE-TX: half or full, 1000BASE-T: full only |
| Additional Ports |
1 dual-personality (RJ-45 or USB micro-B) serial console port |
Hardware Specifications
| Memory & Processor |
Dual Core ARM Cortex @ 1016 MHz 1 GB DDR3 SDRAM Packet Buffer: 12.38 MB (4.5MB Ingress/7.875MB Egress) 4 GB eMMC storage |
| Switching Capacity |
104 Gb/s |
| Throughput |
Up to 77.4 Mp/s |
| Latency |
< 3.8 μs (64-byte packets) |
Management & Control
- Aruba AirWave Network Management
- IMC - Intelligent Management Center
- Command-line interface
- Web browser configuration
- SNMP manager
- Telnet
- RMON1
- FTP
- Out-of-band management (serial RS-232C or micro USB)
Physical Specifications
| Dimensions |
4.39 x 44.25 x 30.42 cm (1.73 x 17.42 x 11.98 in) |
| Form Factor |
1U rack height |
Electrical Specifications
| Power Certification |
80plus.org Silver |
| Maximum Power Rating |
459 W |
| Idle Power |
48.6 W |
| PoE Power |
370 W PoE+ |
| Voltage |
100-127 / 200-240 V AC |
| Current |
5.1/2.5 A |
| Frequency |
50/60 Hz |
| Heat Dissipation |
1652.13 kJ/hr (1566 BTU/hr) |
Network Capacity
| MAC Address Table |
32,768 entries |
| Routing Table |
10,000 entries (IPv4), 5,000 entries (IPv6) |