Product Introduction

Product overview

---Outdoor high-voltage fast permanent magnet vacuum circuit breaker is an outdoor distribution vacuum circuit breaker with a rated voltage of 12kV and three-phase AC 50Hz.

---Outdoor high-voltage vacuum circuit breaker is a new generation of outdoor column vacuum circuit breaker developed to meet the needs of the smart grid.

--- It is used to switch loads of different properties and frequent operations, and can break short-circuit current many times.

---It can be used as the 10kV side outgoing line of the main transformer of the substation and the switch on the column of the distribution network.

---It is the preferred equipment to realize the intellectual, automation, and miniaturization of the distribution network.

Technical parameters

Working conditions

1. Ambient air temperature: upper limit + 70 ºC, lower limit - 40 ºC

2. Air relative humidity: the daily average value shall not be greater than 95%, and the monthly average value shall not be greater than 90%;

3. Altitude: < 2000m;

4. Wind pressure: no more than 700pa (equivalent to wind speed of 34m / s)

5. Pollution level: Class V (specific creepage distance ≥ 31mm / kV)

6. Icing thickness: ≤ 10mm;

7. Seismic intensity: ≤ 8 degrees;

8. Installation site: there shall be no fire, explosion hazard, serious pollution, chemical corrosion, or violent vibration.

Main Functions

1. protection: it is equipped with three-stage voltage blocking directional overcurrent protection, inverse time overcurrent protection, zero sequence protection, acceleration protection, overload protection, low-frequency load shedding, low-voltage splitting, and three-phase triple reclosing;

2. Measurement: three-phase voltage, current, power factor, frequency, etc.

3. control function: automatic reclosing, local control, and remote control can be set

4. Communication function: standard RS232, RS485, or Ethernet interface, supporting optical fiber, distribution network carrier, wireless, twisted pair, and other communication modes, GPRS short message or communication, etc.

5. Other functions: local display, parameter setting, fault recording and alarm, etc.