SKY3000 Marine Multi-Gas Monitor with CO2 Infrared Sensor
Product Overview
SKY3000 suction multi gas detector specially designed for marine & maritime industry, simultaneously detects CO, H2S, O2, LEL, CO2. It features IP67 protection, 3m drop resistance and complete explosion-proof certification, with man down alarm, optional wireless transmission and software-free data export.
SKY3000 is IECEx/ATEX/EMC certified pumping multi gas detector tailored for ship safety inspection. Built-in sampling pump and standard water trap filter adapt humid salt marine environments, rotatable large LCD and abundant data recording functions simplify daily vessel gas patrol.
Introduction to 5 Combined Gases for Marine Monitoring
This 5-gas matching scheme is widely used on cargo ships, passenger vessels and offshore platforms:
- CO: Produced by incomplete combustion of ship engines, easily causes acute poisoning in closed engine rooms
- H2S: Released from bilge sewage and deteriorated cargo, highly toxic and corrosive to human respiratory tract
- O2: Monitors hypoxia or oxygen enrichment risks in ballast tanks and sealed cabins
- LEL: Detects leakage of ship fuel to prevent fire and explosion accidents
- CO2: Accumulates in refrigerated cargo holds, leading to crew suffocation hazards
Key Technical Specifications
| Parameter |
Value |
| Model |
SKY3000 |
| Target Gases |
CO, H2S, O2, LEL, CO2 (Maritime Special 5-Gas Combination) |
| Detection Principle |
CO/H2S/O2: Electrochemical; LEL: Catalytic combustion; CO2: Infrared |
| Measuring Ranges |
CO:0-1000ppm; H2S:0-100ppm; O2:0-30%VOL; LEL:0-100%LEL; CO2:0-5000ppm |
| Resolution |
CO:1ppm; H2S:0.1ppm; O2:0.1%VOL; LEL:1%LEL; CO2:1ppm |
| Precision |
≤±1-5% F.S |
| Response Time |
≤20S |
| Display |
160×96 graphical LCD, 180° rotatable, adjustable backlight duration |
| Supported Languages |
Chinese, English, Russian, Polish, customizable extra languages |
| Unit Switch |
PPM, mg/m³, %LEL, %VOL one-key switchable |
| Data Recording |
Max 100,000 readings, storage interval 5~3600s, export to PC without dedicated software |
| Alarm System |
95dB buzzer, flashing red LED, vibration; latchable alert, man down alarm, pump failure & low voltage reminder |
| Power Supply |
3.7V 2200mAh rechargeable lithium battery |
| Continuous Pumping Runtime |
Over 15 hours |
| Charging Time |
≥4 hours, matched DC travel charger |
| Explosion-proof Grade |
Ex ia IIC T4 Ga, IECEx & ATEX II 1G certified |
| Protection Class |
IP67, 3-meter drop resistant housing |
| Working Temperature |
-20℃ ~ +50℃ |
| Working Humidity |
10~90%RH (non-condensing) |
| Working Air Pressure |
86~106Kpa |
| Standard Configuration |
Built-in water trap filter for sensor protection |
| Optional Functions |
Bluetooth / Lora wireless, calibration docking station, remote firmware upgrade |
| Dimension |
157*84.5*59.5mm (with back clip & filter) |
| Weight |
365g (including battery, clip and filter) |
Main Features
- Dedicated 5-gas detection scheme for maritime vessels, meets routine safety inspection demands of engine rooms, cabins and cargo holds
- Three kinds of mature sensors (electrochemical / catalytic combustion / infrared) to realize stable independent measurement of each gas
- IP67 fully sealed casing with 3m anti-drop performance, adapts damp, salty and bumpy marine working conditions
- Equipped standard water trap filter to isolate seawater mist and liquid, effectively extend sensor service life
- 180° rotatable large screen with adjustable backlight, convenient reading in narrow ship spaces
- Standard man down alarm to provide safety guarantee for single crew entering confined tanks
- Latchable triple sound-light-vibration alarm, reminds pump failure, low voltage and calibration overdue
- Mass storage of 100,000 groups of data, directly export files to computer without special software
- Optional Bluetooth & Lora wireless module for remote real-time data and alarm viewing
- One-key factory reset, automatic self-test and zero calibration after power on
- Matching docking station for daily bump test, supports remote firmware online upgrade
- Over 15 hours continuous pumping operation, satisfies full-day ship inspection work shifts
Typical Marine & Offshore Applications
Cargo ship engine room daily gas safety patrol
Closed ballast tank and cabin pre-entry gas test
Refrigerated cargo hold CO2 concentration monitoring
Offshore platform confined space inspection
Ship bilge sewage H2S toxic gas detection
Vessel fuel pipeline flammable vapor leakage check
Marine chemical transport tank sampling inspection
FAQ
Q1: What gases can this maritime SKY300 detector measure?
A: It detects 5 gases dedicated for ships: CO, H2S, O2, LEL, CO2, with corresponding electrochemical, catalytic combustion and infrared sensors.
Q2: How long can the device run continuously under pumping mode?
A: More than 15 hours of uninterrupted pumping work after full charging.
Q3: Is there special anti-moisture design for marine environments?
A: Yes, IP67 dust and water resistant shell, 3m drop resistance, plus built-in water trap filter to block seawater mist.
Q4: Can detection data be exported without installing professional software?
A: Yes, stored records can be directly transmitted to PC without extra program installation.
Q5: Does it support remote wireless real-time data viewing?
A: Bluetooth and Lora wireless transmission functions are optional configurations.
Q6: Is man down alarm a standard built-in function?
A: Man down alarm comes standard, protecting single staff working in enclosed ship areas.
Q7: What are the advantages of the device screen?
A: 160×96 graphical LCD supports 180° rotation, backlight lighting time can be manually adjusted.
Q8: Does it pass international explosion-proof certification suitable for ship hazardous areas?
A: It has IECEx and ATEX II 1G certificates, intrinsic safety grade Ex ia IIC T4 Ga.
Q9: How to complete regular calibration of the detector?
A: Optional dedicated docking station supports daily bump test and regular span calibration.
Company Introduction
Shenzhen YuanTe Technology Co., Ltd. (brand: Safegas) was established in 2010 and specializes in the R&D, manufacturing, and sales of gas detection equipment and integrated systems. With over 16 years of industry expertise, the company serves sectors including oil & gas, chemicals, environmental protection, electronics, municipal engineering, agriculture, and household appliances. All products are manufactured under ISO9001 and ISO45001 management systems, holding international certifications such as IECEx, ATEX, and EMC. With an annual production capacity of over 80,000 units, YuanTe Technology supplies gas detection solutions to customers worldwide.
Company Advantages
- Established since 2010 – Over 16 years of experience in gas detection R&D and manufacturing.
- Full product range – Portable detectors, fixed transmitters, analyzers, control panels, accessories.
- International certifications – IECEx, ATEX, EMC certified for hazardous areas.
- Wide gas & industry coverage – Hundreds of gases; serve oil & gas, chemical, mining, environmental, food, pharma, and more.
- Strong R&D & quality – ISO9001 & ISO45001 certified; professional R&D team and global service network.
- High production capacity – Over 80,000 units per year with fast delivery (5–7 working days typical).
- Global customer support – 24/7 after sales service and solutions tailored to diverse industries.