Product Description
 
The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.
 
Features
	- High gain, easy installation and operation.
 
	- Full-duplex, single-port design, build-in power supply.
 
	- Use ALC technology, adjust extent automatically
 
	- LED Light Working & Signal Condition Indicators
 
	- Big linear power, control intermodulation & saturation stably
 
	- Dependability stand by GB6993-86 standard
 
	- Compatibility of electromagnetism according with ETS300 609-4
 
	- CE and RoHs Approved
 
Technique
	
		
			| Frequency range DCS1800 | 
			1710—1785MHz 
			1805—1880MHz | 
		
		
			| Gain ( dB) | 
			Uplink Gp≥55 Downlink Gp≥60 | 
		
		
			| Export power (Po) | 
			≥30dBm | 
		
		
			| Pass band ripple | 
			≤3dB | 
		
		
			| I/O impedance | 
			50Ω/N connector | 
		
		
			| Noise figure | 
			≤4dB | 
		
		
			| Transmission Delay | 
			≤0.5μs | 
		
		
			| Ambient temperature | 
			-10?pan>60?pan> | 
		
		
			| Power supply | 
			AC110240V 4555Hz | 
		
		
			| Size | 
			204×120×37mm | 
		
		
			| Reliability | 
			To the GB6993-86 standard | 
		
		
			| Electromagnetic compatibility | 
			To the ETS300 694-4 standard | 
		
		
			| Function | 
			a) Power supply LED denote 
			b) Export power LED denote | 
		
		
			| coverage area | 
			3000 m2 | 
		
	
Installation Approaches
	- Fix up outdoor antenna reception on housetop and point to signal tower.
 
	- Connect outdoor antenna to “outdoor” port in repeater machine through cable.
 
	- Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
 
	- Plug power adaptor into AC power socket and finish installation.
 
Technique Supporting
	- If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
 
	- If cannot call out, please adjust the direction of outdoor antenna.
 
	- If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20
 
Accessories
Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.
Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc
Product Description
The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.
Features
	- High gain, easy installation and operation.
 
	- Full-duplex, single-port design, build-in power supply.
 
	- Use ALC technology, adjust extent automatically
 
	- LED Light Working & Signal Condition Indicators
 
	- Big linear power, control intermodulation & saturation stably
 
	- Dependability stand by GB6993-86 standard
 
	- Compatibility of electromagnetism according with ETS300 609-4
 
	- CE and RoHs Approved
 
Technique
	
		
			| Frequency range DCS1800 | 
			1710—1785MHz 
			1805—1880MHz | 
		
		
			| Gain ( dB) | 
			Uplink Gp≥55 Downlink Gp≥60 | 
		
		
			| Export power (Po) | 
			≥30dBm | 
		
		
			| Pass band ripple | 
			≤3dB | 
		
		
			| I/O impedance | 
			50Ω/N connector | 
		
		
			| Noise figure | 
			≤4dB | 
		
		
			| Transmission Delay | 
			≤0.5μs | 
		
		
			| Ambient temperature | 
			-10?pan>60?pan> | 
		
		
			| Power supply | 
			AC110240V 4555Hz | 
		
		
			| Size | 
			204×120×37mm | 
		
		
			| Reliability | 
			To the GB6993-86 standard | 
		
		
			| Electromagnetic compatibility | 
			To the ETS300 694-4 standard | 
		
		
			| Function | 
			a) Power supply LED denote 
			b) Export power LED denote | 
		
		
			| coverage area | 
			3000 m2 | 
		
	
 
Installation Approaches
	- Fix up outdoor antenna reception on housetop and point to signal tower.
 
	- Connect outdoor antenna to “outdoor” port in repeater machine through cable.
 
	- Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
 
	- Plug power adaptor into AC power socket and finish installation.
 
Technique Supporting
	- If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
 
	- If cannot call out, please adjust the direction of outdoor antenna.
 
	- If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20
 
Accessories
Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.
Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc