Car Repair High Adhesion Light Smell Easy To Apply Car Body Filler

Easy-To-Sand Polyester Putty Leveling High Efficiency Car Body Filler

What is MJ-COAT Body Filler?

• If you need to patch a dent or gouge in your vehicle, you might reach for the putty that’s commonly known as MJ-COAT.
• This polyester-based resin is officially known as automotive body filler, and We recommend using MJ-Coat's putty.
• Here’s a look at the different types, and when you should (or shouldn’t) use fillers to fix your vehicle.

Description:

• MJ-COAT Two pack polyester putty for car refinish to fill dents and surface irregularities of the car body before painting. It is suitable for steel.
• Selling, high quality, clog free, lightweight body filler is a great value with its smooth spreading and easy sanding features.
• Non-clog formula adds greater value in sandpaper savings.
• Packaged with yellow and red cream hardener.

Types of putty:

• There are three primary grades of auto body filler: standard, medium, and premium.
• The grade you choose will depend on how much damage you need to repair.
• Standard putty is great for minor scratches and dents — think shopping cart scrapes and small hailstone dings.
• It’s lightweight and it’ll cure in just 20-25 minutes.
• For small holes and gashes in metal or fiberglass, reach for medium-grade fiberglass filler.
• And if you need to patch larger dents or rips, consider a premium filler. This grade contains aluminum particles that make it more durable than other grades.
• Plus, it doesn’t shrink during the curing process, and it’s easier to sand.

SURFACE PREPARATION:

• Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent.
• Surface must be thoroughly dry before repairing or applying material.
• Keep the repair area small.
• Use 40-80 grit to remove the paint and featheredge.

DRYING/SANDING TIMES

• Allow the application of filler to cure 20 to 30 minutes.
• Sand with 80 grit sand paper and featheredge with 180 grit sandpaper or finer.
• Wait 1 hour before painting.
• Drying time depends on temperature and amount of hardener used.
• Optional: Apply a very thin layer of MJ-coat Glazing & Spot Putty to fill pinholes or small imperfections if necessary.