Check Compatibility – Ensure the bottle has a 28mm neck (standard for 28/410 sprayers).
Remove any seal – Peel off the foil or plastic seal from the bottle opening.
Screw on the sprayer – Twist the trigger sprayer clockwise until snug (do not overtighten).
Some sprayers require priming (pumping the trigger a few times) before the first use to draw liquid into the nozzle.
If nothing comes out after several pumps, check for clogs or improper sealing.
Rotate the nozzle to select:
Mist (for wide, gentle coverage – e.g., glass cleaners).
Stream (for targeted, concentrated spraying – e.g., stain removers).
Jet (for high-pressure cleaning – e.g., outdoor sprays).
Hold upright – Tilted bottles may not dispense properly.
Press the trigger – Use steady, even pressure for consistent spraying.
Release to stop – The sprayer will automatically reset.
Some models have a locking mechanism (twist or push-lock) to prevent accidental spraying during storage.
Unscrew the sprayer and refill the bottle as needed.
Rinse the sprayer if switching chemicals to avoid clogging.
❌ No spray? → Check for clogs, ensure proper sealing, and prime the pump.