Using a foam pump is straightforward, but correct technique ensures the best foam quality.
1. Preparation (First Use or After Refill):
Ensure the pump is securely screwed onto the bottle.
Prime the Pump: You will need to press the pump several times (usually 5-10) before foam appears. This is necessary to draw the liquid up the dip tube and through the mechanism for the first time.
2. Dispensing Foam:
Place your hand or a receptacle under the nozzle. Do not touch the nozzle.
Press the actuator down firmly and completely in one smooth motion.
A pre-measured amount of rich foam will be dispensed directly into your hand.
3. After Use:
If any foam residue remains on the nozzle, you can wipe it off with a damp cloth to keep it clean. A clogged nozzle is the most common cause of failure.
