HDPE roller
| SERIES | DIAMETER (mm) | SHELL WALL (mm) | NOMINAL SHAFT DIAMETER (mm) | BEARING PART NO. | MIN BEARING DYNAMIC LOAD RATING (N) |
|---|---|---|---|---|---|
| 20 | 127 | 3.5 + 6.5 | 20 | 6204 – 2RS | 12 700 |
| 25 | 127 | 3.5 + 6.5 | 25 | 6205 – 2RS | 14 000 |
| 152 | 4 + 6.5 | ||||
| 159 | 4 + 10 | ||||
| 27 | 127 | 3.5 + 6.5 | 25 | 6305 – 2RS | 22 500 |
| 133 | 3.5 + 9.5 | ||||
| 152 | 4 + 6.5 | ||||
| 159 | 4 + 10 | ||||
| 32 | 127 | 3.5 + 6.5 | 30 | 6306 – 2RS | 28 100 |
| 133 | 3.5 + 9.5 | ||||
| 152 | 4 + 6.5 | ||||
| 159 | 4 + 10 | ||||
| 178 | 4 + 6.5 | ||||
| 35 | 152 | 6 + 6.5 | 35 | 6307 – 2RS | 33 200 |
| 159 | 6 + 10 | ||||
| 178 | 6 + 6.5 | ||||
| 40 | 152 | 6 + 6.5 | 40 | 6308 – 2RS | 41 000 |
| 159 | 6 + 10 | ||||
| 178 | 6 + 6.5 | ||||
| 193 | 6 + 7.5 | ||||
| 219 | 6 + 13 | ||||
| 45 | 178 | 6 + 6.5 | 45 | 6309 – 2RS | 52 700 |
| 193 | 6 + 7.5 | ||||
| 50 | 193 | 6 + 7.5 | 50 | 6310 – 2RS | 61 800 |
For use in low-noise applications, each HDPE roller combines the strength of Lorbrand’s standard welded steel body with the non-stick properties of a high-density polyethylene sleeve.
These rollers are so quiet that at belt speeds below 3 m/s, the running belt can barely be heard. This combination makes them strong, lightweight and suitable for high tonnage applications and conveyor belt systems greater than 1600mm wide.
Key Aspects