0.6/1KV CABLE Low Voltage Armoured Electrical Power Cable
Product Overview
Cross-linked polyethylene insulated power cable featuring excellent electrical and mechanical properties with powerful resistance against chemical corrosion, heat aging, and environmental stress.
| Specification |
Details |
| Rated Voltage |
0.6kV/1kV |
| Size Range |
1.5-800mm² |
| Conductor Material |
Copper or Aluminum |
| Insulation Material |
PVC/XLPE |
| Jacket Material |
PVC/PE |
| Armour Type |
Steel Wire |
| Application |
Underground, Indoor, Tunnel, Canal |
| Standards |
IEC, ASTM, BS, DIN, TUV, BV, CE, ISO, CCC |
| Model Number |
VV22 |
Cable Construction
- Conductor: Solid or stranded copper or aluminum
- Insulation: Cross-linked polyethylene (XLPE) or PVC
- Circuit Identification: Red and black insulation colors
- Filler: Polypropylene filament with lapped binding tape
- Inner Sheath: Polyvinyl chloride (Black)
- Core-covering: Binding tape
- Outer Sheath: Polyvinyl chloride (Black)
Core Configuration
Available in 1, 2, 3, 4, 5, 3+1, 3+2, 4+1 cores
Operating Characteristics
- Maximum allowed operating temperature: 90°C for long-term operation
- Short-circuit maximum temperature: 250°C (duration ≤ 5 seconds)
- DC Resistance complies with GB/T3956-1997 standards
- Minimum installation temperature: 0°C (preheating required below this temperature)
- No horizontal drop limitations during installation
- Minimum bending radius: 12 times cable outer diameter for three-core cables
- Working Frequency Voltage Test: 3.5Uo/5min without puncture for 3.6kV~18kV cables
- Partial Discharge Test: ≤ 10pC under 1.73Uo
Packaging
Wooden drum, steel wooden drum, or customized packaging as per customer requirements.