Detached IP20 Remote Control Motion Sensor Mounting Height Max 6m
Detached Design Remote Control Output LED Power 36W Band Isolation Scheme
Features of Dimmable Motion Sensor:
1. Surport remote control settings parameters
2. Disconnector plug design easy to install
3. Obtain SAA,RED,CE,TUV and RoHS cetificate
4. Suitable for tri-proof light and battenlight.
5. IP 20 and 3 years warranty.
Technical data of Dimmable Motion Sensor:
| Model number | HT36V-I | | Input voltage | 120-240VAC,50Hz/60Hz | | Input current | 0.36A-0.16A Max | | Input power | 42W(Max) | | Output LED current | (Max )0.75A ±5% | | Output LED voltage | 30V-48V DC | | Output LED power | 23-36W | | Stand-by power | ≤0.5W(230VAC) | | Empty load voltage | ≤70VDC | | Power factor | ≥0.9 | | Efficiency | ≥87% (Max.) | | Microwave frequency | 5.8GHz±75MHz | | Microwave power | <0.3mW | | Detection area | 100%/75%/50%/25% | | Hold time | 5s/30s/1min/3min/5min/10min/20min/30min | | Daylight threshold | Disable/120Lux/80Lux/50Lux/30Lux/10Lux/2Lux | | Stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ | | Stand-by dimming level | 10%/20%/30%/50% | | Mounting height | Max.6m (ceiling mounted) | | Deteation range | Max.ø14m (ceiling mounted) | | Motion detection | 0.5–1.5m/s | | Packing method | ①the bubble pack, ②paper flat, ③outer carton(400*300*236mm)with drying agent(The sensor 66pcs/carton,gross weight 15kg) | | Detection angle | 30°-150° | | Operating temperature | Ta: -20°C~50°C Tc: 85°C | | Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP | | EMC standard | EN55015 | | Safety standard | EN61347-1 EN61347-2-13 EN60598-1 | | IP rating | IP 20 | | Warranty | 3 years | |
On/Off Control Detection Area Hold Time Daylight Sensor
Stand-by dimming Stand-by Remote Control
level Period
User Notes:
1. Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting height and movement volume.
4. Conduct test on sunny days without the lampshade which will affect the tested lux value.
5. Factory default setting:detection area 100%/hold time 5s/daylight threshold disable/satnd-by period 0s/stand-by dimming level 10%
HT36V-I.pdf