120-277V IP65 Microwave Sensor Dimmable With UL Remote Control
Features
Parameter Table
| Operating voltage | 120-277VAC,50Hz/60Hz | 
| Switching capacity | 400W | 
| Stand-by power | ≤1W | 
| Detection area | 10%/50%/75%/100% | 
| Hold time | 5s/30s/1min/3min/5min/10min/20min/30min | 
| Daylight threshold | 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable | 
| Stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ | 
| Stand-by dimming level | 10%/20%/30%/50% | 
| Microwave frequency | 5.8GHz±75MHz | 
| Microwave power | <0.3mW | 
| Mounting height | Max.15m ( 49.21ft ) | 
| Detection range | Max.ø14m/45.93ft | 
| Detection angle | 30°-150° | 
| Operating temperature | -35°C~+60°C | 
| IP rating | IP65 | 
| Life time | 50,000 hours | 
| Warranty | 5 years | 
Factory Default Setting
Remote Control
#HD03R, the standard remote control
Specification Download HD03R .pdf
Wiring Diagram

Installation
Type A: Suitable for highbay light with aluminium shade
Type B: Suitable for directly mounted on the ceiling
Type C: Suistable for UFO highbay light
Type D: Suitable for linear highbay light

Performance
* Daylight Threshold
With sufficient daylight, even when motion detected, light remains OFF.
* Bi-Level Dim
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100% brightness for the hold time.
After holdtime, sensor dims light to standby dimming level (10% 20% 30% 50%) and keeps for a standby period.
After standby period,sensors turns OFF the light.
* ON/OFF
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100% brightness for the hold time.
Preset standby period as 0S, sensor turns OFF the light after holdtime.
HD406VRH ON&OFF specification.pdf