High Strength Composite Panel Making Machines with Forced Mixing System

Full Automatic Composite Lightweight Wall Panel Making Machine

3. Advantages of Full automatic lightweight wall panel forming machine
1). Full automatic production system.
2). High production output and low input.
3). Lightweight, thin body, high strength, impact resistance, heat insulation, sound insulation hanger force is strong, waterproof, fireproof, easy cutting.
4). Environmental protection and other comprehensive advantages
5). Convenient construction, civilization, short construction period.The production process for lightweight wall panel:

1. Metering System
After accurate weighing Fly ash, cement and sand, then being stirred with water into a slurry.
2. Forced mixing system
The slurry is transported by conveyor to the slurry compulsory mixer, and mixing with polystyrene particles evenly. Finally the slurry is poured into the mold.
3. Steam curing system.
The mould will be driven into curing room by the ferry cart for curing

The raw material proportion:

1. Energy-saving: With low heat conduction coefficient and small wind resistance, the

composite vent-pipe improves largely the transmission efficiency of cold and

hot air.

2. Easy operation, installation and transportation. With light weight, high

strength and small volume, so the installation space above this product is not

required.

3. Noise Reduction. With good sound-insulation performance, it can keep the indoor environment quiet and reduce

the noise arisen from air vibration and machinery with its performances. At the

same time, it has such features: heat-preservation, shock absorption and sound

absorption.

4. Excellent fireproof performance with fireproof grade A, and it can improve

largely the quality of air, because it doesn’t rust, mould, accumulate dust, reproduce

bacteria, produce stench, produce grain and globular pollutant as well as organic

volatile substance.

5. Good sealing performance and super high breaking-resistant intensity. The gelatinized structure improves largely the sealing

performance. In view of that the breaking strength is 2.5Mpa and it can bear 2500

Pa wind pressure, so the product can be used by the high, middle and low pressure

ventilation system.