OD 500mm 310 316L 316Ti Stainless Steel Bright Bar For Construction

• Shaft Parts: Used in food processing machinery, chemical machinery, textile machinery, and other applications requiring rust resistance and sufficient strength for rotating shafts and drive shafts.
• Fasteners and Connectors: Manufactured high-strength bolts, nuts, pins, etc., for use in corrosive environments.
• Molds and Fixtures: Especially 316 stainless steel, due to its superior corrosion resistance, used for plastic molds (such as PVC processing molds) or precision fixtures requiring rust resistance.
• Structural Support Components: Serving as pillars, guide rails, supports, etc., in machines.

• Valves and Pump Components: Manufactured critical components such as valve stems, pump shafts, and impellers, resistant to corrosion from various acid, alkali, and salt media.
• Reactor Components: Used for stirring shafts, temperature measuring sleeves, etc.
• Oil and Gas Extraction: Components for offshore platform equipment, pipeline fittings, etc., resistant to seawater and acidic media corrosion.
• Nuclear and Thermal Power: Corrosion-resistant components for some auxiliary systems.

This is the "main battleground" for 304 stainless steel, due to its non-toxic, easy-to-clean, and corrosion-resistant properties.

Applications: Stirring shafts, filling equipment parts, conveyor main shafts, slicer blade holders, container supports, and all metal parts that come into direct or indirect contact with food or Medicals.

• Structural Components: Used in highly corrosive environments or for building curtain wall support structures with high aesthetic requirements, bridge tie rods, etc.
• Decorative Components: Polished or brushed bars used as handrails, railings, decorative moldings, door and window fittings, etc.

• Marine: Used in marine hardware, deck equipment, and fasteners near seawater.
• Automotive: Mainly used in exhaust systems (some models), decorative strips, small fuel system components, etc.
• High-Speed Rail/Rail Transit: Interior structural components, bathroom/kitchen equipment supports, etc.

Primarily used in the manufacture of surgical instruments, dental equipment, implants (such as orthopedic screws and plates, typically using higher-grade 316L or titanium alloys), medical bed frames, trolley supports, etc., requiring high cleanliness and resistance to disinfectant corrosion.

Manufacturing high-end kitchenware such as knife handles and spindles, cutlery, watch cases, jewelry, and mobile phone frames, etc.

Container Specifications:

• 20ft GP: 5898mm (Length) x 2352mm (Width) x 2393mm (High)
• 40ft GP: 12032mm (Length) x 2352mm (Width) x 2393mm (High)
• 40ft HC: 12032mm (Length) x 2352mm (Width) x 2698mm (High)

Standard Export Seaworthy Package. Suitable for all kinds of transport, or as required.

Delivery: 10-15 work days