ASTM 3003 3004 3005 3104 3105 3A21 Aluminum Tape / Aluminum Strip
Aluminum coil is cast rolling mill after calendering, pulling and bending angle processing, in order to carry out flying shear metal products. Thermal insulation aluminum skin appearance, good gloss is commonly used in pipeline construction, rock wool, glass wool, aluminum silicate, pipeline insulation of the outer skin construction.
Aluminum coil is widely used in electronics, packaging, construction, machinery and so on.
Type | Chemical Composition For several alloys |
Si | Fe | Cu | Mn | Mg | Zn | Ti | other | Al |
1060 | 0.20 | 0.25 | 0.30 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 99.60 |
1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | 0.03 | 99.50 |
3003 | 0.60 | 0.70 | 0.05-0.20 | 1.0-1.5 | | 0.10 | | 0.15 | Remain |
5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2-2.8 | 0.10 | ------ | 0.2 | Remain |
Product | 1100/3003/3105/5052/6061 Aluminum Alloy Coil for building construction used |
Thickness | 0.2mm-8mm |
Width | 100mm-2650mm, the max width we could reached is 2650mm |
Length | As customer's requirements |
Temper | temper H, temper O, temper T |
Features | Our company mainly doing with 1,2,3,5,6,7 series aluminum sheet/coil. For different customers' requirements. |
Application | 1) roof 2) car building 3) curtain wall 4) Shelter 5) oil tank 6) mould |
Surface | flat, cleaness, without oil |
Packing | Export standard wooden pallets (as per requirements) |
Payment Terms | 30% T/T in advance as deposit,70% balance against the B/L copy or 100% irrevocable L/C at sight |
Minimum Order Quanlity | 5-12 tons pre size |
Delivery time | 30 days after receiving L/C or deposit |
Loading Port | any port in China |
Remark | Specific requirement of alloy grade,temper or specification can be discussed at your request |
3 Series Aluminum Coil Material
3XXX series aluminum coils, is a relatively common product, representative of the 3003 aluminum plate. Generally speaking, the aluminum content of 3 series aluminum coil is 99.8%, and the manganese content is between 1% and 1.5%. 3 series aluminum coil is usually called aluminum-manganese alloy aluminum coil, and because of its alloy content of manganese accounted for more, it is also known as rust-resistant aluminum plate, and so on. 3 series representative material:
3003 aluminum coil, 3a21 aluminum coil, 3004 aluminum coil, 3005 aluminum coil material 3003 aluminum coil alloy composition: Silicon Si: 0.6, copper Cu: 0.05 - 0.2, zinc Zn: 0.1, manganese Mn: 1.0 - 1., iron Fe: 0.7, alone: 0.05, aluminum, the balance.
5 Series Aluminum Coil Material
5 series aluminum coil belongs to is only after 1 series 3 series and a piece of more commonly used aluminum coil material. 5 series of representative alloy elements are aluminum, magnesium, manganese alloy. Therefore, many friends of the mouth of the aluminum-magnesium-manganese plate is the 5 series aluminum coil, because the 5 series aluminum coil with aluminum-magnesium-manganese elements, so the use of a wide range of uses, performance is also very good, coupled with the hot rolling and forging process to make the application of the aluminum plate is more widely used. 5 series representative material:
5052 aluminum coil, 5A21 aluminum coil, 5005 aluminum coil, 5083 aluminum coil material 5052 aluminum coil alloy composition: Aluminum Al: remainder, silicon Si: ≤ 0.25, copper Cu: ≤ 0.10, magnesium Mg: 2.2 ~ 2.8, zinc Zn: ≤ 0.10, manganese Mn: ≤ 0.10, chromium Cr: 0.15 ~ 0.35, iron Fe: ≤ 0.40, Note: individual: ≤ 0.05; Total: ≤ 0.15.
6 Series Aluminum Coil Material
Magnesium and silicon are the core elements of 6-series aluminum coils. 6-series aluminum coils are cold treated aluminum forging products, so they are also known as aluminum-magnesium-silicon products. Excellent performance, oxidation effect are good, so suitable for a variety of uses in the environment are more appropriate. 6 series representative material:
6061 aluminum coil, 6063 aluminum coil, 6082 aluminum coil material 6061 aluminum coil alloy composition: Silicon Si: 0.40-0.8, iron Fe: 0.7, copper Cu: 0.15-0.40, manganese Mn: 0.15, magnesium Mg: 0.8-1.2, chromium Cr: 0.04-0.35, zinc Zn: 0.25, titanium Ti: 0.15, aluminum Al: the balance of the other: individual: 0.05 Total: 0.15.
OUR Factory



Product Display










Applications

1. Q: Are you a manufacturer or trading company?
A: We are a professional manufacturer with 1.5 million tons of aluminum annually in China. We have passed the factory inspection by various international organizations and have our own sales team. Welcome to seeing and inspecting our factory
2. Q: Do you have quality control system?
A: Yes,we have iso,bv,sgs certifications and our own quality contorl laboratory.
3. Q: How long is your delivery time?
A: Within 7-15 days after receiving the deposit or L/C at sight. Longer lead time will be required for special designed products.
4. Q: Do you provide samples ? is it free or extra ?
A:Yes, we could offer the sample for free charge but the delivery charges will be covered by our customers.
5. Q: Do you provide after-sale service?
A: We provide after-sales service and offer 100% guarantee on our products.