MachineU > China Products > Lights & Lighting > Lighting Accessories > LED Driver

30W DALI DT6 And PushDIM 150ma to 300mA Dimmable LED Driver with output voltage 60-150Vdc

Specifications

Model Number :

KL30C-PDii1

Current :

150/200/250/300mA

MOQ :

100

Delivery Time :

1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.

Efficiency :

91%

Control Method :

DALI DT6 and pushDIM

Packaging Details :

White box + Carton, 100pcs/CTN

Payment Terms :

T/T or PayPal

DC Input Voltage range :

200-240Vdc

Power factor :

≥0.95

Brand Name :

Merrytek

Dimension :

L116mm*W40.5mm*H22mm

Place of Origin :

China

Warranty :

5 years

Price :

Negotiation

Operating mode :

Constant Current

IP rating :

IP20

Certification :

Supply Ability :

10,000pcs per month

Rated Input Voltage :

220-240Vac 50Hz /60Hz

Description

30W DALI DT6 And PushDIM 150ma to 300mA Dimmable LED Driver with output voltage 60-150Vdc

1. Description

-Flicker-free for the whole dimming range

-Stand-by power below 0.5W

-Primary dimming with push button

-Built-in DALI interface DT6

-Centrally-supplied DC emergency operation DT19

-Protection: short circuit / over temperature/ over voltage

-Current Derating over high ambient temperature

-pushDIM with the memory function

-5 year warranty

2. Parameters

	Micro Series	KL30C-PDii1
Input	Operating Voltage	198-264Vac 50Hz/60Hz
	Rated Input Voltage	220-240Vac 50Hz/60Hz
	DC Input Voltage range	200-240Vdc
	Input Current	0.15A Max.
	Input Inrush Current	<15A (Half current pulse width100μs) @230Vac
	Power factor(@230V100% load)	≥ 0.95
	Total harmonic distortion (@230Vac, 100% load)	Typical:15%
	Stand-by power	≤0.5W (@230Vac when PUSH or DALI turn off)
	Efficiency(@230Vac,100% load)	91%
	Wiring Method	0.75-1.5mm²
	Automatic circuit breaker	Calculate the current in the wire
		type	C10	C13	C16	C20	C25
		Number	45	60	70	95	120
		type	B10	B13	B16	B20	B25
		Number	25	30	40	50	60

Output	Operating mode	Constant Current
	Load type	LED
	Ripple requirement (Flickering or Flickering-Free)	Flicker value: less than 5% for the whole dimming range
	Start-up time	<1s (@230Vac)
	No-load output voltage	185VDC Max.
	Load output voltage range	60-150V DC
	Full load output power	30W
	Load output current: For details<Current gear setting>	150-300mA
	Constant current/voltage Precision	Constant Current Precision ±5%
	Wiring method	Push terminal, wire cross section:0.75-1.5mm²
Control Method	Primary PUSH Dimming	Primary PUSH dimming (Max.lead length:20M)
Control Method	DALI Dimming	DALI dimming (Max.lead length: 300M)
Exception Protection Requirements	Output over temperature protection	Yes, without self recovery function(Can be inquired)
Exception Protection Requirements	Output short circuit protection	Yes, without self recovery function(Can be inquired)
Operating Environment	Operating temperature/ humidity	-25℃~45℃ Humidity:85% (Non-condensing)
	Storage temperature/ humidity	-40℃~80℃, Humidity:10%–95%
	Max. case temp(Tc)	85℃
Safety & EMC	EMC standard	EN55015 EN61547 EN61000-3-2 EN61000-3-3
	DALI protocol standard	IEC62386-101/ 102/ 207 DT6/ 220 DT19/ 251/ 252/ 253
	Safety standard	EN61347-1 EN61347-2-13
	Certification	CE
	ROHS & REACH	Compliant
Others	Degrees of protection	IP20
	Type of protection	Class II
	Installation type	Built-in installation
	With crimping	11640.522mm
	Without crimping	7840.522mm
	Blackout memory function	Yes, PUSH blackout memory
	PUSH dimming synchronization	Parallel: 15 units Max. Series: 25 units Max.
	Packaging requirement	outer carton(K=K)
	Weight	100.5±5g (with crimping) & 86.9±5g (without crimping)
	Life	5 year @Ta full load
Note: All parameters are tested at the input voltage of 230Vac and 25 degree environment unless specified.

3. Dimension (Unit: mm)