MachineU > China Products > Lights & Lighting > Lighting Accessories > LED Driver
25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving
25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving
25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving
25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving
25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving
25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving
25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving
25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving
Specifications
Brand Name :
Merrytek
Model Number :
ML25C-PV
Certification :
SEMKO / CE/ RoHS
Place of Origin :
China
MOQ :
Stop production, not available.
Price :
Negotiation
Payment Terms :
T/T or Western Union or PayPal
Delivery Time :
1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
Packaging Details :
Packed in bubble bag firstly, and then reinforced with carton for outer packing
Product name :
25W dimming LED power supply
Output load :
1 x 25W max.
Stand-by power :
≤0.5W
Output voltage :
68Vdc Max.
Input voltage :
220~240Vac
Dimming mode :
1-10V, PUSH
Working temperature :
-25℃-50℃
Isolation Class :
Class Ⅱ
Approvals :
SEMKO/ CE/ RoHS
Protection Class :
IP20
Description

25W non flickering 1-10V / PUSH dimming LED power supply Energy saving

Description:

1, 5-year warranty

2, Dim via a potentiometer

3, Stand-by power below 0.5W

4, Primary dimming with PUSH Button

5, Secondary dimming with 1-10V dimmer

6, Flicker-free for whole dimming range

7, Support Master-Slave grouping net-working

8, Dimming level memory at mains restores

9, Derating current for over high ambient temperature

10, Protection: Short circuit/ Over temperature/ Over voltage

11, Maximum length of the cable, from push button to last driver is 20m

Specifications

INPUT

 Input voltage 220-240Vac
Input frequency 50-60Hz
Input current 0.14A max
Power factor (Note 1) ≥0.90
Efficiency(Note1) ≥80%
Stand-by power (Note 2) ≤0.5W

OUTPUT

 Output current/ voltage

250mA 6~58Vdc 14.5W max; 350mA 6~58Vdc 20W max

500mA 6~50Vdc 25W max; 700mA 6~36Vdc 25W max
Output load range 25.2W Max.
Current accuracy ±5%
Dimming mode 1-10V, PUSH

ENVIRONMENT

 Working temp.(Ta) -20~50℃
Surface temp.(Tc) 85℃max
Working humidity 20~85%RH non-condensing
Storage temp. -40~80℃
Life time ≥50000hours

PROTECTION

 Isolation class Class Ⅱ, SELV
Protection class IP20
Over voltage 300Vac, 2H
Short circuit Protection type; auto reset
No-load Protection type; auto reset
Over temperature Protection type; auto reset

OTHERS

 Safety EN61347-1 EN61347-2-13
EMC EN55015, EN61000-3-2
EN61000-3-3, EN61547
Approvals SEMKO, CE, RoHS
Withstand voltage IN-OUT:3.75KVAC/5mA/1min
Dimension (L x W x H) 150x52x28mm
Connection

Press-in type terminals, 0.75-1.5mm2

Input: L,L,N,N,PUSH,PUSH,Sync,Sync

Output: SEC(+) SEC(-), 1-10V(+),1-10V(-)

NOTE

Note:

1, Power factor and efficiency is detected at 230Vac input and full load.

2, Standby power is detected at 230Vac input and switch off led load by push button.

Mechanical Specification:

Dimming Operation:

1.Push button switch for dimming (see wiring diagram, Fig A & Fig B)

  • ON/OFF: Short push (120ms ~ 1sec) on the switch
  • Stepless dimming: Long push (＞1sec) on the switch. With every other long push, the light level goes the opposite direction.
  • Synchronization: No need additional synchrony wire in larger installation, up to 15pcs drivers when connected to the same switch.

2.1-10V dimming (see wiring diagram, Fig C)

The driver supports any active 1-10V dimmer. When the dimming signal is less than 0.8V ~ 1V or short the dimming wires, the output of LED driver could be completely switch off, see Fig C

Wring Diagram:

Fig.A

25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving

Fig.B

25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving

Fig.C

25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving

Download:

ML25C-PV.pdf

Product tags

24v dimmable led power supply

,

dimmable 12v led power supply

,

220v downlight led dimmable
Send your message to this supplier
Send Now

25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving

Ask Latest Price
Product Detail
Brand Name :
Merrytek
Model Number :
ML25C-PV
Certification :
SEMKO / CE/ RoHS
Place of Origin :
China
MOQ :
Stop production, not available.
Price :
Negotiation
Contact Supplier
25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving
25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving
25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving
25W Non Flickering 1-10V / PUSH Dimming LED Power Supply Energy Saving

Shenzhen Merrytek Technology Co., Ltd.

Verified Supplier
10 Years
guangdong, shenzhen
Business Type :
Manufacturer, Exporter, Seller
Main Products :
Microwave Motion Sensor, Dimmable Motion Sensor, Presence Detectors Sensor
Employee Number :
200~300
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Triac Dimmable LED Driver
MachineU China Products Lights & Lighting Lighting Accessories LED Driver
Contact Supplier
Submit Requirement