The NVIDIA MFP7E10-Nxxx series comprises passive optical multimode cables with MPO-12/APC connectors, leveraging 8 active fibers out of the 12-fiber array. The MFP7E10-N010 offers a standard 10-meter length, ideal for top-of-rack (ToR) switch to server connections within racks or across adjacent rows. Designed specifically for NVIDIA's high-speed networking ecosystem, it supports 800Gb/s twin-port OSFP transceivers as well as 400Gb/s single-port OSFP and QSFP112 modules. The Angled Polished Connector (APC) with 8-degree polish dramatically reduces back reflection, ensuring signal integrity for PAM4 modulation used in 50G, 100G per lane architectures.

This Type-B crossover fiber mapping (pin 1 to pin 12) enables direct attachment between transceivers without additional polarity management, simplifying deployment. Every cable is factory-tested to meet Telcordia GR-1435 and IEC 61754-7 specifications, guaranteeing out-of-the-box reliability.

• MPO-12/APC female connectors with alignment holes – compatible with transceiver alignment pins
• 8 active multimode fibers (50/125 µm) with 4 unused fibers as strength members
• Crossover Type-B polarity: eliminates need for patch cord reversal
• Flexible round LSZH (Low Smoke Zero Halogen) / OFNR jacket – aqua color for multimode identification
• Supports InfiniBand NDR, Ethernet 400GbE/800GbE, and NVLink protocols
• Push-pull latching mechanism for quick release and secure mating
• Operating temperature: 0°C to 70°C; storage: -40°C to 85°C
• Low insertion loss profile optimized for high-speed PAM4 signals

The MPO-12/APC connector end face features an 8-degree angled polish, which minimizes optical back reflections that can cause transmitter instability and bit errors in high-speed links. Unlike Ultra Physical Contact (UPC) connectors typically used in lower-speed applications, APC ensures return loss ≥35 dB, critical for 100G PAM4 and beyond. The cable’s Type-B (crossover) topology maps the transmit lanes at one end to the receive lanes at the opposite transceiver – lane 1 (transmit) connects to lane 12 (receive), lane 2 to lane 11, etc. This matches the standard MPO pinout recommended by IEC 61754-7 for direct interconnect without external adapters.

• Switch-to-switch links: Connect twin-port OSFP switches (800G) using two MPO-12/APC ports for aggregated throughput.
• Switch-to-adapter: Connect NVIDIA ConnectX-7 network adapters or BlueField-3 DPUs via OSFP or QSFP112 transceivers.
• Spine-leaf architectures in data centers requiring 50-meter multimode reach (with up to 4 connector junctions).
• High-performance computing (HPC) and storage disaggregation with NVLink fabric extensions.

Designed and validated for seamless interoperability with NVIDIA transceivers and networking hardware. Compatible with:

Note: The cable is strictly compatible with MPO-12/APC connectors. Do not mate with MPO-12/UPC (blue shell) connectors as polish mismatch may cause physical damage and signal degradation.

NVIDIA offers multiple lengths to suit various rack densities and campus interconnects. Choose based on exact reach requirements:

All cables share identical mechanical and optical specifications except length tolerance (±2% for L≥5m).

• End-to-end validation: Each cable is paired with NVIDIA transceivers for guaranteed interoperability and link margins.
• Low total cost of ownership: Passive design eliminates power consumption, reducing cooling overhead in data centers.
• Durability and safety: LSZH jacket minimizes toxic fumes in case of fire; OFNR rated for riser installations.
• Precision manufacturing: Factory-polished APC connectors with consistent geometry ensure repeatable low loss.
• Warranty and support: Direct NVIDIA compatibility reduces troubleshooting complexity.

Hong Kong Starsurge Group provides full supply chain services, including bulk procurement, custom labeling, and worldwide shipping. Our technical team assists with polarity planning, link budget calculations, and deployment validation. For RMA or firmware compatibility queries, contact our support desk at networking-support@nvidia.com or reach out directly via your Starsurge sales representative.

• Do not remove dust caps until the moment of installation to prevent contamination of optical end faces.
• Avoid exceeding the minimum bend radius of 30 mm; tight bends can cause micro-bending loss and permanent fiber damage.
• Although the cable is non-conductive and ESD insensitive, it mates with ESD-sensitive transceivers – follow standard ESD precautions during handling.
• Never mix MPO-12/APC (green shell) with MPO-12/UPC (blue shell) connectors; mismatched polishes will not seat correctly and may damage the alignment pins.
• Use only isopropyl alcohol and lint-free wipes or dedicated MPO cleaners for ferrule cleaning.

Hong Kong Starsurge Group Co., Limited is a technology-driven provider of network hardware, IT services, and system integration solutions. Founded in 2008, the company serves customers worldwide with products including network switches, NICs, wireless access points, controllers, cables, and related networking equipment. Backed by an experienced sales and technical team, Starsurge supports industries such as government, healthcare, manufacturing, education, finance, and enterprise. The company also offers IoT solutions, network management systems, custom software development, multilingual support, and global delivery. With a customer-first approach, Starsurge focuses on reliable quality, responsive service, and tailored solutions that help clients build efficient, scalable, and dependable network infrastructure.

Official NVIDIA Partner: Starsurge provides genuine NVIDIA cables, transceivers, and networking components with full supply chain transparency and fast delivery.

• Confirm connector type: MPO-12/APC (female) on both ends – green shell.
• Verify link distance: OM3 supports up to 30m; OM4 supports up to 50m (with 4 connections).
• Ensure transceivers are compatible with Type-B crossover polarity; NVIDIA optics require Type-B for direct attach.
• Check that your patch panels, if used, are also MPO/APC and maintain polarity mapping.
• Stock appropriate MPO cleaners and dust caps for maintenance.

• NVIDIA MMA4Z00-NS – Twin-port OSFP 800G DR8 transceiver for switches
• NVIDIA MMA1Z00-NS400 – QSFP112 400G DR4 transceiver for ConnectX-7 adapters
• NVIDIA MFP7E20 series – Active optical cables (AOC) for longer reach
• MPO-12/APC to MPO-12/APC bulkhead adapters – For extension and panel mounting