MachineU > China Products > Tools & Hardware > Pumps & Parts > Pumps
FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump
FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump
FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump
FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump
FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump
FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump
Specifications
Brand Name :
YUE MI
Model Number :
FTK-45mm
Certification :
ISO SGS
Place of Origin :
Guangzhou, China
MOQ :
1/PCS
Price :
US $ 1~99/PCS
Payment Terms :
L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability :
100/Set/Month
Delivery Time :
2 word days
Packaging Details :
Details Carton
Traemark :
YUEMI
Country Of Origin :
Guangzhou, China
Item: :
FTK
Shaft Diameter :
45mm
Metal Parts And Springs :
SS304,SS316
Material :
CAR CER SSIC NBR
Description
FTK-45mm Ebara Mechanical Seal Face for Submersible Electric Pumps
FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump
The Ebara combined mechanical seal 560DA-45A FTK-45 is a high-quality double seal designed for submersible pumps. This cost-effective solution provides complete compatibility with original equipment specifications.
Water Pump Model Compatibility
FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump
Mechanical Seal Dimensions
Model d(mm) d, d2 d3 ds d7 l1 12 13 14 l5
FTK16 16 18.2 41 41.5 23.0 33 26.5 7.5 10 9.0 5.0
FTK-20 20 21.2 45 43.8 27.0 38 29.0 7.0 10 12.0 5.0
FTK-25 25 26.4 52 51.0 30.5 47 34.5 7.0 13 14.5 8.5
FTK-40 40 41.2 75 75.0 50.5 65 48.6 12.0 21 15.6 13.0
Technical Parameters
Parameter Specification
Temperature Range -30℃ to +150℃
Maximum Pressure ≤0.3 MPa
Maximum Speed ≤4500 rpm
Compatible Media Clean water, seawater, gas engine antifreeze
Material Composition
Component Material Options
Rotary Ring Ceramic / Silicon Carbide (SiC)
Stationary Ring Plastic Carbon / Carbon / Silicon Carbide (SiC)
Spring SUS304 / SUS316 Stainless Steel
Stationary Seat SUS304 / SUS316 Stainless Steel
Secondary Seal NBR / EPDM / HNBR / FKM Elastomers
Rotary Ring Holder SUS304 / SUS316 Stainless Steel
Installation Preparation
  • Shaft outside diameter tolerance: ±0.05mm
  • Shaft run out: <0.1mm
  • Shaft end float: <0.13mm
  • No sharp edges on the shaft over the O-ring area
Important Note: During installation, avoid scratching or damaging the O-ring. If any damage occurs, contact us immediately for replacement.
Installation Instructions
The complete cartridge seal assembly is thoroughly cleaned and leak-tested before sale. To prevent damage, do not disassemble or clean components before installation.
Installation Steps
  • The fitting allowance between seal and shaft is dl h6 0.8. Ensure a leading-in edge at the shaft end.
  • The shaft outside diameter at screw positions should be 0.1-0.2mm smaller to prevent over-tightening.
  • Lubricate the shaft with appropriate oil before installation.
  • Place the cartridge seal into the pump chamber, then:
    • Tighten four screw bolts of flanges, ensuring the medium leading-in hole "G" is at the top position
    • Tighten four set screws to position the shaft sleeve on the shaft
    • Remove four gauge plates (retain for future installation and disassembly)
    • Connect the medium lead-in pipe with hole "G" to flush away friction heat and maintain seal chamber cleanliness during pump operation
Post-Installation Check: After completing installation, manually rotate the shaft to verify smooth rotation. If the shaft does not rotate smoothly, the seal may have been improperly installed.
FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump
We are committed to establishing long-term cooperative relationships with our clients by supplying high-quality products and exceptional service. Our success is built on mutual trust and lasting partnerships.
Send your message to this supplier
Send Now

FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump

Ask Latest Price
Watch Video
Product Detail
Brand Name :
YUE MI
Model Number :
FTK-45mm
Certification :
ISO SGS
Place of Origin :
Guangzhou, China
MOQ :
1/PCS
Price :
US $ 1~99/PCS
Contact Supplier
video
FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump
FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump
FTK-45mm Ebara Mechanical Seal Face Submersible Electric Pump

YUEMI

Verified Supplier
3 Years
guangdong, guangzhou
Since 2002
Main Products :
Water Pump Mechanical Seal, Grundfos Pump Mechanical Seal, Flygt Mechanical Seal
Total Annual :
3000000-5000000
Employee Number :
50~80
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Ebara Mechanical Seal
MachineU China Products Tools & Hardware Pumps & Parts Pumps
Contact Supplier
Submit Requirement