Danfoss MBS4510060G2419 Pressure Switches / Transmitters High Precision New

Product Description:

Advantages and features of Danfoss pressure switches/transmitters

‌High accuracy and wide range coverage‌

Supports a measurement range of 0-600 bar with an accuracy of ±0.5% FS, suitable for high-stability monitoring of corrosive liquids, gases and high-viscosity media.

Through ceramic sensors and media isolation design, reliable pressure signal conversion is achieved to reduce the interference of media characteristics on measurement.

‌Intelligent diagnosis and adaptive functions‌

With leakage alarm and pressure mutation detection functions, it can dynamically adjust the pressure set point to optimize energy consumption and support remote digital communication (such as 4-20mA, 0-10V output).

Built-in flow compensation mechanism to meet the real-time needs of complex industrial scenarios.

‌Environmental adaptability and reliability‌

The stainless steel housing and NBR sealing material provide IP67 protection level, vibration resistance, EMI/EMC interference resistance, and are suitable for harsh working conditions such as dust and vibration.

The oil pressure differential switch can monitor the pressure difference of the lubrication system in real time, trigger an alarm and shut down to protect equipment (such as compressors).

‌Modularity and flexibility‌

Provides a variety of installation methods such as British pipe threads and copper pipe welding, supports plug-in wire connection, and is easy to deploy quickly.

The pressure setting range is adjustable (30%-65% of the recommended range) to adapt to different equipment parameter requirements.

Precautions for use

‌Installation specification‌

When measuring gas pressure, the pressure port should be located at the top of the pipeline, and the transmitter should be installed on the upper part of the pipeline; liquid pressure measurement requires lateral pressure measurement to avoid sedimentation and blockage.

Wiring requires the use of waterproof connectors, and tightening the sealing nuts to prevent rainwater from penetrating into the housing.

‌Environment and parameter control‌

Avoid contact with corrosive and overheated media, and clean the installation holes regularly; high temperature and pulsating pressure environments require the installation of throttle valves or diaphragm protection.

The power supply voltage must not exceed 36V to prevent damage to electronic components.

‌Maintenance and Calibration‌

Regularly check the sensitivity of the solenoid valve and ensure that the reset switch is cooled before manual operation (for example, the oil pressure differential switch needs to wait for the recovery of thermal deformation.

After the alarm is triggered, the cause of the pressure difference abnormality needs to be investigated to avoid frequent forced resets that may cause equipment damage.

‌Safety Protection‌

Explosion-proof scenarios require the selection of flameproof or intrinsically safe products, and ensure that the EMC shielding line is grounded.

Anti-freezing measures must be taken for outdoor installations in winter to prevent low temperatures from causing sensor failure.

Through intelligent diagnosis and modular design, this series of products is widely used in industrial compressors, air conditioning systems and offshore equipment, taking into account both safety and energy efficiency management.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.