AVENTICS 0821303540 Filter Steel Safety Durable 100% New Original

Product Description:

1. Advantages and Features

High-efficiency filtration and purification capabilities

The wedge-shaped filter design, combined with the 5μm pore filtration accuracy, effectively intercepts impurities, dust and moisture in the compressed air, reducing the risk of wear of the pneumatic system;

Supports differential pressure control or timed automatic cleaning of the filter element, reduces maintenance frequency through backwashing technology, and the backwashing water consumption is 30% lower than the traditional design.

Excellent pressure and temperature resistance

The working pressure covers 1.5~16bar, and the temperature range is -10~60℃, which is suitable for high or low temperature environment applications;

The die-cast zinc shell + polycarbonate gas cup structure has strong impact resistance and is suitable for harsh working conditions such as dust and vibration.

Intelligent control and convenient maintenance

Provides manual, semi-automatic and fully automatic condensate discharge modes to meet the needs of different scenarios;

Integrated pressure gauge for real-time monitoring and adjustment, supports vertical installation design, and simplifies the operation process.

‌Safety and wide adaptability‌

ATEX certified, safe for use in hazardous areas (such as flammable and explosive environments);
Rated flow rate up to 6900L/min, suitable for centralized or decentralized compressed air preparation systems.

2. ‌Precautions for use‌

‌Installation and commissioning requirements‌

Vertical installation is required and the air source flow direction must be consistent with the valve marking direction to avoid reverse flow affecting the filtration performance;
Check the integrity of the seals (such as propylene rubber seals) before commissioning to prevent leakage caused by improper installation.
‌Operation and maintenance specifications‌

Regularly monitor the cleanliness of the oil (NAS 1638 level 6 standard is recommended), clean the filter element every 500 hours and check the filter blockage;
High temperature environment (>60℃) requires additional heat dissipation devices to avoid shell deformation or seal failure.

‌System adaptation optimization‌

For large flow scenarios, the powerful NL4 series air source processing unit is preferred to avoid pressure fluctuations due to insufficient flow;
Use a voltage-stabilized power supply to control the electromagnetic components, and the voltage fluctuation must be ≤±10% to prevent coil overload damage.

‌Cleaning and replacement of consumables‌

Corrosive solvents are prohibited for cleaning non-metallic parts. After cleaning, they must be dried immediately and greased to prevent oxidation;
Original accessories (such as wedge-shaped filters) must be used when replacing filter elements to ensure filtration accuracy and system compatibility.

‌Key tips‌:

Before long-term shutdown, the compressed air in the system must be emptied to prevent condensed water from corroding internal components;
In the fully automatic cleaning mode, the reliability of the drain valve operation must be checked regularly to avoid impurities accumulation.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.