1.RECOMMENDED USE

Can be used in bottoms & below water of steel structure as maintenance anti-fouling paint for ship industry etc.

2.COMPLIED STANDARDS

Complies with GB/T6822-1986

3.FEATURES

(1).Long-term protection against fouling
(2).Controlled surface smoothness by a self-polishing effect
(3).Free from organic tin compounds
(4).Outstanding high-build applicability
(5).Good workability

4.PHYSICAL PROPERTIES
(1).Color:Brown, Light brown
(2).Volume solids:59%
(3).VOC:419 g/L
(4).Flash Point:Greater than 23C
(5).Film thickness

Dry:75－150 p m/coat Wet:127-254 μ m/coat
(6).Theoretical Coverage:5.9m²/L/100 microns
Practicalcoveragdependingonsufaceconditins,envionent applications,etc.

5.SURFACE PREPARATION
(1).Remove oil and grease with suitable detergent or solvent(SSPC-SP 1)
(2).Remove rust,mill-scale and other loose material completely by abrasive blasting(ISO Sa2.5).
(3).All surface to be coated should completely clean dry and fee from contamination.

6.APPLICATION

Application Temperature:-5℃-40℃

Mixing:Mix thoroughlywith power agitator

Mixing Ratio:One component coating

Application Methods:Airless spray,air spray, brush and roller

Airless spray
Nozzle tip:0.43mm-0.53mm
Nozzle pressure:>15Mpa

Thinner: Special Thinner

Drying Time& Overcoating interval:

Applied Substrate:Bare steel

Typical undercoat:DWPEMARINE 300G (Ethylene transition paint) etc.

7.STORAGE
Store in dry,cool condition and away from sources of heat and ignition Containers must be kept tightly closed.
Shelf life:12 months from date of production (25C)

8.DISCLAIMER

The information given on this sheet is to the best of our knowledge and accurate at the time of issuing.Since conditions of use are beyond the manufacturer's control, information contained herein is without warranty,implied or otherwise,and the suitability of the material for the use contemplated is the sole responsibility of the buyer.The information contained on this data sheet is subject tomdattatplcodi
using the product.